Safety data sheet for Vanillin
CAS 121-33-5
This is the free preview of a draft SDS for Vanillin — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Vanilla fragrance, food flavour.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 121-33-5
- Molecular formula
- C8H8O3
- Molecular weight
- 152.15 g/mol
- Signal word
- Warning
Hazard classification
- GHS07 — Exclamation mark — irritant
- H319: Causes serious eye irritation.
Section 1 — Identification
1.1 Product identifier
Product identifier: Vanillin
Chemical name (IUPAC): 4-hydroxy-3-methoxybenzaldehyde
CAS number: 121-33-5
PubChem CID reference: 1183
Synonyms: vanillin; 4-Hydroxy-3-methoxybenzaldehyde; Vanillaldehyde; Vanillic aldehyde; p-Vanillin; Vanilline; Lioxin; 3-Methoxy-4-hydroxybenzaldehyde; Benzaldehyde, 4-hydroxy-3-methoxy-; 4-Hydroxy-m-anisaldehyde
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows carry EU CLP (ECHA) classifications; no US-specific classification source resolved for this substance.
Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]
2.2 Label elements
Signal word: Warning
GHS pictograms: GHS07 (Exclamation)
Hazard statement: H319: Causes serious eye irritation.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: White to yellow crystalline powder
Odor: Sweetish smell
Boiling point: 286°C (547°F) at 1013 hPa
Melting point: 81°C (178°F)
Flash point: 153°C (307°F) closed cup
Density: 1.06 g/cm³
Vapor pressure: 0.016 Pa at 25°C
Water solubility: 11,020 mg/L at 25 °C
Log Pow (log Kow): 1.37 (measured)
Vapor density: 5.2 (air = 1)
Auto-ignition temperature: 400°C (752°F)
pH: Solutions are acid to litmus
Not stated in the sourced records: Lower explosive limit, Upper explosive limit, Viscosity.
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- Lewis, R.J. Sr.; Hawley's Condensed Chemical Dictionary 15th Edition. John Wiley & Sons, Inc. New York, NY 2007, p. 1313
- View the record
- Boiling point — EPA CompTox Chemicals Dashboard (ChemPROP)
- PubChem_2024_11_27, exp_prop_BOILING_POINT_v2.0
- View the record
- Melting point — EPA CompTox Chemicals Dashboard (ChemPROP)
- Echemportalapi, exp_prop_MELTING_POINT_v2.0
- View the record
- Flash point — EPA CompTox Chemicals Dashboard (ChemPROP)
- OChem_2024_04_03, exp_prop_FLASH_POINT_v2.0
- View the record
- Vapor pressure — Hazardous Substances Data Bank (HSDB)
- Yaws CL; Handbook of Vapor Pressure. Vol 3: C8-C28 Compounds. Houston, TX: Gulf Pub Co (1994)
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Yalkowsky, S.H., He, Yan, Jain, P. Handbook of Aqueous Solubility Data Second Edition. CRC Press, Boca Raton, FL 2010, p. 480
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 42
- View the record
- Vapor density — Hazardous Substances Data Bank (HSDB)
- Clayton, G.D., F.E. Clayton (eds.) Patty's Industrial Hygiene and Toxicology. Volumes 2A, 2B, 2C, 2D, 2E, 2F: Toxicology. 4th ed. New York, NY: John Wiley & Sons Inc., 1993-1994, p. 451
- View the record
- pH — Hazardous Substances Data Bank (HSDB)
- O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 1843
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- ECHA CHEM C&L backfill 2026-10-13
- ECHA indexed CLP row
- EPA CompTox Chemicals Dashboard (ChemPROP)
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Vanillin, and where each one comes from
39 measured values for 9 properties, read from 2 public databases. On 4 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
4 records, 284 to 286 °C
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 284 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 285 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 285.5 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Melting point
4 records, 81 to 83 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- 82 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Flash point
5 records, 118 to 160 °C
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
- 153 °C (307 °F) - closed cup
- Hazardous Substances Data Bank (HSDB)
- 160.3 °C at 766.562 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Vapour pressure
8 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 1.18X10-4 mm Hg at 25 °C
- Hazardous Substances Data Bank (HSDB)
- 0.00334527206 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0021751769 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.000204002 mmHg at 24.1 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0001182 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.000118195 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.000118 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.000118 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Vapour density
1 record
Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.
- 5.2 (Air = 1)
- Hazardous Substances Data Bank (HSDB)
Density
1 record
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
Solubility
13 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- In water, 1.102X10+4 mg/L at 25 °C
- Hazardous Substances Data Bank (HSDB)
- Soluble in 125 parts water, 20 parts glycerin, 2 parts 95% alcohol, chloroform, ether
- Hazardous Substances Data Bank (HSDB)
- Very soluble in ethanol, diethyl ether, acetone; soluble in benzene, ligroin
- Hazardous Substances Data Bank (HSDB)
- 0.0591525 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0700014 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.065725 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.072277 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0591562 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0723468 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.072429 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.065725 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0722976 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0724 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
Partition coefficient (log Kow)
1 record
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 1.37
- Hazardous Substances Data Bank (HSDB)
Odour
2 records, each a different case
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Sweetish smell
- Hazardous Substances Data Bank (HSDB)
- Pleasant aromatic vanilla odor
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Vanillin, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Vanillin
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.