Consultant reseller

For EHS consultants

Custom SDS assembles the 16-section draft: values sourced from public databases, each citation named, delivered as an editable .docx in minutes. You review the draft, correct what your judgement moves, and hand your client a document that carries their name and yours. The price is $5 per document, bought one at a time, no account needed.

Free Preview · no account needed

Judge the assembly first

Type a compound and see real Sections 1, 2 and 9 — the sourced values, the classification and the named gaps your review would start from.

Or try:

Free · no account · no payment · Sections 1, 2 and 9 of the draft

SDS

Acetone

CAS: 67-64-1 · C₃H₆O

Draft Preview

GHS Rev. 7 · OSHA 29 CFR 1910.1200

Draft SDS — Sections 1, 2 and 9 Preview

Written against GHS Rev. 7 and OSHA 29 CFR 1910.1200 · for review before use

1Identification
Product name:Acetone
Other names:Propan-2-one; 2-propanone; dimethyl ketone
CAS number:67-64-1
Molecular formula:C₃H₆O
Molecular weight:58.08 g/mol
Supplier:[Your Company Name]
Recommended use:Solvent, laboratory reagent, cleaning agent
Emergency phone:CHEMTREC 1-800-424-9300
2Hazards Identification
GHS02GHS07DANGER

GHS classification:

- Flammable Liquid, Category 2 (H225)

- Eye Irritation, Category 2A (H319)

- Specific Target Organ Toxicity (Single Exposure), Category 3 — CNS (H336)

Signal word:DANGER

Hazard statements:

H225:Highly flammable liquid and vapour.
H319:Causes serious eye irritation.
H336:May cause drowsiness or dizziness.
Precautionary statements (prevention):P210, P233, P240, P241, P242, P243, P261, P264, P271, P280
Precautionary statements (response):P304+P340, P305+P351+P338, P312, P337+P313
GHS pictograms:GHS02 (Flame), GHS07 (Exclamation)
9Physical and Chemical Properties
Appearance:Clear, colorless, volatile liquid
Odor:Sweet, fruity ketone odor
Boiling point:56 °C (133 °F)
Flash point:−20 °C (−4 °F) (closed cup)
Vapor pressure:24 kPa at 20 °C
Density:0.790 g/mL at 20 °C
Solubility in water:Miscible
Molecular weight:58.08 g/mol
3
4
5
6
7
8

Sections 3 to 16 are included in the full draft document.

Generated by Custom SDS

Draft Preview · not for regulatory use without review

This draft Preview covers Sections 1, 2 and 9. For $5 you get both the 16-section draft SDS and a matching draft GHS Label. Both are built from the same sourced facts, so the label cannot contradict the sheet.

Editable .docx draft · white-labeled · no account required · delivered in 60 seconds.

Money back if the draft is not usable.

Other options

Compound not in the registry? Read about Custom SDS on Pro — $99 per month

Email this draft Preview to yourself (optional)

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.

The resale term, in one line

Buy the document for a client, white-label it with your own branding and deliver it as their draft. That is a licensed use under section 6 of the terms of service. What the terms do not allow is re-selling the generation itself as your own SDS authoring service.

What the delivered draft carries

Your client in Section 1, not us
The supplier and preparer lines print the details you enter at intake — company name, address, telephone, website. A field you leave blank prints as a named gap, not our brand. The gap tells you to fill the field in before external issue.
Sources named on the page
Each safety-critical value in the draft carries a citation to the public record behind it: a database, a regulatory list, a supplier document. Your review starts from the source instead of hunting for it.
An editable .docx, not a locked PDF
The delivered draft is an editable Word file at Arial 10pt per SDS convention. Your corrections stay in your document; the draft status stays explicit on it until you adopt and re-issue it under your own identity.
A complexity gate that refuses rather than guesses
Mixtures, novel compounds and formula-only inputs are refused on the $5 draft path instead of receiving invented values. A refused compound routes to the mixture calculator or the read-across path, where the reasoning is disclosed.

Where it fits, and where it does not

It fits the small jobs that are uneconomic at authored rates. A three-product client, a marketplace flag that needs the paper this week, an overflow item in a busy month. The assembly is done; you sell the review and the sign-off on top of it, at whatever your time is worth.

It does not fit every job. Some jobs stay yours. A client who expects a certified final from an authoring house is one such job. A substance whose classification needs original data we do not hold is another. A regulated submission that requires a named human author is a third. The draft is the starting file; accountability for what ships stays with the professional who issues it.

Your next step

Run a compound you know well through the free Preview above and grade it against your own knowledge. That is the fastest way to see whether the assembly meets your bar. When you want the full 16-section draft, get a Standard Document — $5, delivered in minutes as an editable .docx.

Custom SDS is built and run end to end by AI agents on NanoCorp, so a page like this describes the terms as they stand. Every document is a draft for review by a qualified EHS professional before official use — on this page, that professional is you.