Safety data sheet for Triethanolamine

CAS 102-71-6

This is the free preview of a draft SDS for Triethanolamine — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Cosmetic pH adjuster, cleaners, cutting fluids.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
102-71-6
Molecular formula
C6H15NO3
Molecular weight
149.19 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • H319: Causes serious eye irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Triethanolamine

Chemical name (IUPAC): 2-[bis(2-hydroxyethyl)amino]ethanol

CAS number: 102-71-6

PubChem CID reference: 7618

Synonyms: TRIETHANOLAMINE; Trolamine; 2,2',2''-Nitrilotriethanol; Sterolamide; Daltogen; Nitrilotriethanol; Tris(2-hydroxyethyl)amine; Triethylolamine; Trihydroxytriethylamine; Thiofaco T-35

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes this sheet resolves: Eye Irrit. 2.

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]

Second-source corroboration: every hazard class above is corroborated by Safe Work Australia HCIS.

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H319: Causes serious eye irritation.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Viscous liquid

Odor: Slight ammonical odor

Boiling point: 335.4°C (636°F) at 1013 hPa

Melting point: 21.5°C (71°F)

Flash point: 179°C (354°F) closed cup

Density: 1.1242 at 20 °C/4 °C; 1.0985 at 60 °C/4 °C

Vapor pressure: 1.3 Pa at 20°C

Water solubility: 1,000,000 mg/L

Log Pow (log Kow): -1.00 (measured)

Vapor density: 5.14 (air = 1)

Auto-ignition temperature: 324°C (615°F)

Decomposition temperature: 335.4°C (636°F) (decomposes)

Viscosity: 590.5 cP at 25°C

pH: pH = 10.5 (0.1 N aqueous solution)

Not stated in the sourced records: Lower explosive limit, Upper explosive limit.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Larranaga, M.D., Lewis, R.J. Sr., Lewis, R.A.; Hawley's Condensed Chemical Dictionary 16th Edition. John Wiley & Sons, Inc. Hoboken, NJ 2016, p. 1369
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 1791
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-524
View the record
Flash point — Hazardous Substances Data Bank (HSDB)
National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-110
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Vapor pressure — EPA CompTox Chemicals Dashboard (ChemPROP)
Echemportalapi, exp_prop_VAPOR_PRESSURE_v2.0
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 25
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
IPCS, CEC; International Chemical Safety Card on Triethanolamine. (March 1995)
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
pH — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Triethanolamine, and where each one comes from

54 measured values for 12 properties, read from 4 public databases. On 7 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

9 records, 320 to 360 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

335.4 °C at 760 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)
350 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Melting point

9 records, 17 to 177 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Crystals from ethanol; mp: 177 °C /Triethanolamine hydrochloride/
Hazardous Substances Data Bank (HSDB)
21.6 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
20.5 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
177 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Flash point

7 records, 179 to 193 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

179 °C (354 °F) - closed cup
Hazardous Substances Data Bank (HSDB)
185 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
190.5 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Vapour pressure

6 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

3.59X10-6 mm Hg at 25 °C /Extrapolated/
Hazardous Substances Data Bank (HSDB)
0.014251159000000001 mmHg at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.0000035899999999999982 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.00000359005000000001 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.0000035899999999999982 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Vapour density

2 records differ

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

3 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

1.1242 at 20 °C/4 °C; 1.0985 at 60 °C/4 °C
Hazardous Substances Data Bank (HSDB)

Solubility

7 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 1.0X10+6 mg/L (miscible) at 25 °C
Hazardous Substances Data Bank (HSDB)
Miscible with water, methanol, acetone; soluble in benzene (4.2%), ether (1.6%), carbon tetrachloride (0.4%), n-heptane (<0.1%)
Hazardous Substances Data Bank (HSDB)
Slightly soluble in petroleum ether
Hazardous Substances Data Bank (HSDB)
6.702862122126148 mol/L
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

7 records differ

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

-2.3 Log10 unitless at 25 °C, pH 7.1
EPA CompTox Chemicals Dashboard (ChemPROP)
1.34 Log10 unitless at 25 °C, pH 9.5
EPA CompTox Chemicals Dashboard (ChemPROP)
-1.9 Log10 unitless at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
-2.3 Log10 unitless
EPA CompTox Chemicals Dashboard (ChemPROP)

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

590.5 cP at 25 °C; 65.7 cP at 60 °C
Hazardous Substances Data Bank (HSDB)

pH

1 record

Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.

pH = 10.5 (0.1 N aqueous solution); strong base
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Triethanolamine, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Triethanolamine

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.