Safety data sheet for Tetrasodium EDTA
CAS 64-02-8
This is the free preview of a draft SDS for Tetrasodium EDTA — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Detergent chelator, cosmetics.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 64-02-8
- Molecular formula
- C10H12N2Na4O8
- Molecular weight
- 380.17 g/mol
- Signal word
- Danger
Hazard classification
- GHS05 — Corrosive
- GHS07 — Exclamation mark — irritant
- GHS08 — Health hazard
- H302: Harmful if swallowed.
- H332: Harmful if inhaled.
- H318: Causes serious eye damage.
- H373: May cause damage to organs through prolonged or repeated exposure.
Section 1 — Identification
1.1 Product identifier
Product identifier: Edetate Sodium
Chemical name (IUPAC): tetrasodium;2-[2-[bis(carboxylatomethyl)amino]ethyl-(carboxylatomethyl)amino]acetate
CAS number: 64-02-8
PubChem CID reference: 6144
Synonyms: Edetate sodium; Sodium edetate; EDTA tetrasodium; EDTA sodium; Calsol; Sodium EDTA; EDTA tetrasodium salt; Versene 100; Sequestrene; Endrate tetrasodium
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]
Classification: Acute Toxicity, Category 4 — Inhalation (Acute Tox. 4 (Inhalation)) [H332]
Classification: Serious Eye Damage, Category 1 (Eye Dam. 1) [H318]
Classification: Specific Target Organ Toxicity, Repeated Exposure, Category 2 (STOT RE 2) [H373]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS05 (Corrosion), GHS07 (Exclamation), GHS08 (Health Hazard)
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H332: Harmful if inhaled.
Hazard statement: H318: Causes serious eye damage.
Hazard statement: H373: May cause damage to organs through prolonged or repeated exposure.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.
Precautionary statement: P271: Use only outdoors or in a well-ventilated area.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P270: Do not eat, drink or smoke when using this product.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Precautionary statement: P310: Immediately call a POISON CENTER or doctor/physician.
Precautionary statement: P314: Get medical advice/attention if you feel unwell.
Precautionary statement: P330: Rinse mouth.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: White powder
Melting point: 300°C (572°F)
Density: 0.7 (relative density, water = 1)
Water solubility: 500 g/L at 20 °C
Auto-ignition temperature: >200°C (decomposes)
pH: pH of 1% soln: 11.3
Not stated in the sourced records: Odor, Boiling point, Flash point, Vapor pressure, Log Pow (log Kow), Vapor density, Lower explosive limit, Upper explosive limit, Viscosity.
Where each value came from
- Melting point — Hazardous Substances Data Bank (HSDB)
- O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 2006, p. 597
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Gerhartz, W. (exec ed.). Ullmann's Encyclopedia of Industrial Chemistry. 5th ed.Vol A1: Deerfield Beach, FL: VCH Publishers, 1985 to Present, p. VA10: 96
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Tetrasodium EDTA, and where each one comes from
10 measured values for 4 properties, read from 2 public databases. Every record agrees. Follow any linked record to read the value at its source.
Melting point
1 record
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- 300 °C (decomposes)
- Hazardous Substances Data Bank (HSDB)
Density
1 record
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 6.9 lb/gal /Apparent density/
- Hazardous Substances Data Bank (HSDB)
Solubility
7 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Slightly soluble in ethanol
- Hazardous Substances Data Bank (HSDB)
- Less soluble in alcohol than the potassium salt
- Hazardous Substances Data Bank (HSDB)
- Freely soluble in water
- Hazardous Substances Data Bank (HSDB)
- In water, 500 g/L at 20 °C
- Hazardous Substances Data Bank (HSDB)
- 1.31519 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 1.3152 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.76192 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- pH of 1% soln: 11.3
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Tetrasodium EDTA, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Tetrasodium EDTA
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.