Safety data sheet for Styrene
CAS 100-42-5
This is the free preview of a draft SDS for Styrene — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Fibreglass resins, plastics, coatings.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 100-42-5
- Molecular formula
- C8H8
- Molecular weight
- 104.15 g/mol
- Signal word
- Danger
Hazard classification
- GHS02 — Flammable
- GHS07 — Exclamation mark — irritant
- GHS08 — Health hazard
- H226: Flammable liquid and vapor.
- H332: Harmful if inhaled.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H350: May cause cancer.
- H361d: Suspected of damaging the unborn child.
- H372: Causes damage to organs through prolonged or repeated exposure.
- H304: May be fatal if swallowed and enters airways.
- H412: Harmful to aquatic life with long lasting effects.
Section 1 — Identification
1.1 Product identifier
Product identifier: Styrene
Chemical name (IUPAC): styrene
CAS number: 100-42-5
PubChem CID reference: 7501
Synonyms: STYRENE; Ethenylbenzene; Phenylethylene; Vinylbenzene; Styrol; Cinnamene; Styrene monomer; Benzene, ethenyl-; Phenylethene; Styrolene
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Flammable Liquid, Category 3 (Flam. Liq. 3) [H226]
Classification: Acute Toxicity, Category 4 — Inhalation (Acute Tox. 4 (Inhalation)) [H332]
Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]
Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]
Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H335]
Classification: Carcinogenicity, Category 1B (Carc. 1B) [H350]
Classification: Reproductive Toxicity, Category 2 (Repr. 2) [H361d]
Classification: Specific Target Organ Toxicity, Repeated Exposure, Category 1 (STOT RE 1) [H372]
Classification: Aspiration Hazard, Category 1 (Asp. Tox. 1) [H304]
Classification: Hazardous to the Aquatic Environment, Long-Term Hazard, Category 3 (Aquatic Chronic 3) [H412]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS02 (Flammable), GHS07 (Exclamation), GHS08 (Health Hazard)
Hazard statement: H226: Flammable liquid and vapor.
Hazard statement: H332: Harmful if inhaled.
Hazard statement: H315: Causes skin irritation.
Hazard statement: H319: Causes serious eye irritation.
Hazard statement: H335: May cause respiratory irritation.
Hazard statement: H350: May cause cancer.
Hazard statement: H361d: Suspected of damaging the unborn child.
Hazard statement: H372: Causes damage to organs through prolonged or repeated exposure.
Hazard statement: H304: May be fatal if swallowed and enters airways.
Hazard statement: H412: Harmful to aquatic life with long lasting effects.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.
Precautionary statement: P271: Use only outdoors or in a well-ventilated area.
Precautionary statement: P273: Avoid release to the environment.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P201: Obtain special instructions before use.
Precautionary statement: P202: Do not handle until all safety precautions have been read and understood.
Precautionary statement: P270: Do not eat, drink or smoke when using this product.
Precautionary statement: P240: Ground/bond container and receiving equipment.
Precautionary statement: P241: Use explosion-proof electrical, ventilating, and lighting equipment.
Precautionary statement: P242: Use only non-sparking tools.
Precautionary statement: P243: Take precautionary measures against static discharge.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.
Precautionary statement: P370+P378: In case of fire: Use appropriate extinguishing media.
Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.
Precautionary statement: P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor.
Precautionary statement: P308+P313: IF exposed or concerned: Get medical advice/attention.
Precautionary statement: P332+P313: IF SKIN irritation occurs: Get medical advice/attention.
Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.
Precautionary statement: P314: Get medical advice/attention if you feel unwell.
Precautionary statement: P331: Do NOT induce vomiting.
Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Precautionary statement: P403+P235: Store in a well-ventilated place. Keep cool.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Liquid
Appearance: Colorless to yellowish, oily liquid
Odor: Characteristic, sweet, balsamic, almost floral odor that is extremely penetrating
Boiling point: 146°C (295°F) at 1013 hPa
Melting point: -30.6°C (-23°F)
Flash point: 31°C (88°F) closed cup
Density: 0.9016 g/cm³ at 25°C
Vapor pressure: 8.5 hPa at 25°C
Water solubility: 300 mg/L at 25 °C
Log Pow (log Kow): 2.95 (measured)
Vapor density: 3.6 (air = 1)
Lower explosive limit: 0.9% (v/v in air)
Upper explosive limit: 6.8% (v/v in air)
Auto-ignition temperature: 490°C (914°F)
Viscosity: 0.7 cP at 25°C
Not stated in the sourced records: pH.
Occupational exposure limits for Styrene
The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.
NIOSH REL — TWA (up to 10 h)
50 ppm (215 mg/m³)
NIOSH Pocket Guide to Chemical Hazards
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- Burdock, G.A. (ed.). Fenaroli's Handbook of Flavor Ingredients. 6th ed.Boca Raton, FL 2010, p. 1856
- View the record
- Boiling point — EPA CompTox Chemicals Dashboard (ChemPROP)
- Echemportalapi, exp_prop_BOILING_POINT_v2.0
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-488
- View the record
- Flash point — Hazardous Substances Data Bank (HSDB)
- National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-104
- View the record
- Density — Hazardous Substances Data Bank (HSDB)
- Same reference as melting point above.
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Yalkowsky, S.H., He, Yan, Jain, P. Handbook of Aqueous Solubility Data Second Edition. CRC Press, Boca Raton, FL 2010, p. 468
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 40
- View the record
- Vapor density — Hazardous Substances Data Bank (HSDB)
- IARC. Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans. Geneva: World Health Organization, International Agency for Research on Cancer, 1972-PRESENT. (Multivolume work)
- View the record
- Lower explosive limit — Hazardous Substances Data Bank (HSDB)
- Lewis, R.J. Sr. (ed) Sax's Dangerous Properties of Industrial Materials. 11th Edition. Wiley-Interscience, Wiley & Sons, Inc. Hoboken, NJ. 2004, p. 3312
- View the record
- Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
- Same reference as flash point above.
- View the record
- Viscosity — Hazardous Substances Data Bank (HSDB)
- Riddick, J.A., W.B. Bunger, Sakano T.K. Techniques of Chemistry 4th ed., Volume II. Organic Solvents. New York, NY: John Wiley and Sons., 1985, p. 187
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- EPA CompTox Chemicals Dashboard (ChemPROP)
- Hazardous Substances Data Bank (HSDB)
- NIOSH Pocket Guide to Chemical Hazards
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Styrene, and where each one comes from
82 measured values for 12 properties, read from 5 public databases. On 6 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
6 records, 145 to 146 °C
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 293 °F
- NIOSH Pocket Guide
- 145 °C @760 [mm Hg]
- PAC Chemical Database, U.S. Department of Energy
- 145.2 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 145.5 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Melting point
7 records, -33 to -30 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- -23 °F
- NIOSH Pocket Guide
- -30.6 °C at 759.813 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- -30 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- -33 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Flash point
9 records, 31 to 37 °C
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
- 32.0 °C (89.6 °F) - closed cup
- Hazardous Substances Data Bank (HSDB)
- 88 °F (31 °C) - closed cup
- Hazardous Substances Data Bank (HSDB)
- 34.4 °C (Tag closed cup); 36.7 °C (Tag open cup)
- Hazardous Substances Data Bank (HSDB)
- 88 °F
- NIOSH Pocket Guide
- 34.4 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 31.1 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 32 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 36.7 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Auto-ignition temperature
1 record
The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.
- 914 °F (490 °C)
- Hazardous Substances Data Bank (HSDB)
Explosive limits
1 record
The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.
- Lower explosive limit: 1.1%, Upper explosive limit: 6.1%
- Hazardous Substances Data Bank (HSDB)
Vapour pressure
16 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 6.40 mm Hg at 25 °C
- Hazardous Substances Data Bank (HSDB)
- 5 mmHg
- NIOSH Pocket Guide
- 7.5 [mm Hg] @28.6 °C
- PAC Chemical Database, U.S. Department of Energy
- 8.19817766 mmHg at 29.92 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 6.4 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 5.00290687 mmHg at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 4.99540626 mmHg at 23 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 9.49577226 mmHg at 30 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 6.39802033 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 6.384 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 6.624 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 6.4003 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 5 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 5.0254154 mmHg at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 6.4 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Vapour density
1 record
Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.
- 3.6 (Air = 1)
- Hazardous Substances Data Bank (HSDB)
Density
5 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 0.9016 g/cu cm at 25 °C
- Hazardous Substances Data Bank (HSDB)
- Percent in saturated air at 760 mm Hg & 15 °C: 0.57; density of saturated vapor-air mixture at 760 mm Hg & 15 °C: 1.02 (Air = 1)
- Hazardous Substances Data Bank (HSDB)
- 0.9016 @25 °C
- PAC Chemical Database, U.S. Department of Energy
Solubility
23 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- In water, 300 mg/L at 25 °C
- Hazardous Substances Data Bank (HSDB)
- Insoluble in water
- Hazardous Substances Data Bank (HSDB)
- Soluble in ethanol, ether, and acetone; miscible with benzene; slightly soluble in carbon tetrachloride
- Hazardous Substances Data Bank (HSDB)
- Soluble in carbon disulfide, alcohol, ether, methanol, acetone
- Hazardous Substances Data Bank (HSDB)
- For more Solubility (Complete) data for Styrene (6 total), please visit the HSDB record page
- Hazardous Substances Data Bank (HSDB)
- 0.03%
- NIOSH Pocket Guide
- 0.00278439 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.001513561248 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.002454708916 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00288041 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00297642 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00297642 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00307243 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00288041 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00278439 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00326446 mol/L at 30 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00151356 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00245471 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00297852 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00151356 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00278612 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00211778 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00295 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
Partition coefficient (log Kow)
8 records differ
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 2.95
- Hazardous Substances Data Bank (HSDB)
- 3.16 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.76 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.96 Log10 unitless at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.9 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.95 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.95 Log10 unitless at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
Viscosity
1 record
Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.
- 0.696 cP at 25 °C
- Hazardous Substances Data Bank (HSDB)
Odour
4 records, each a different case
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Characteristic, sweet, balsamic, almost floral odor that is extremely penetrating
- Hazardous Substances Data Bank (HSDB)
- Aromatic odor
- Hazardous Substances Data Bank (HSDB)
- Sweet, floral odor
- Hazardous Substances Data Bank (HSDB)
- If pure, sweet and pleasant, but usually contains aldehydes that have a typical penetrating smell, sharp, sweet, and unpleasant
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Styrene, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Styrene
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.