Safety data sheet for Sodium sulfate
CAS 7757-82-6
This is the free preview of a draft SDS for Sodium sulfate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Detergent filler, dyeing, glass making.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 7757-82-6
- Molecular formula
- Na2O4S
- Molecular weight
- 142.04 g/mol
- Signal word
- None required — not classified
Section 1 — Identification
1.1 Product identifier
Product identifier: Sodium Sulfate
Chemical name (IUPAC): disodium;sulfate
CAS number: 7757-82-6
PubChem CID reference: 24436
Synonyms: SODIUM SULFATE; Disodium sulfate; Sodium sulfate anhydrous; Sodium sulfate, anhydrous; Salt cake; Sodium sulphate; Disodium sulphate; Sulfuric acid disodium salt; Bisodium sulfate; Sodium sulphate anhydrous
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The not-classified determination reflects the EU CLP (ECHA) record; no US-specific classification source resolved for this substance.
Classification: Not classified. This substance meets no hazard class criteria of OSHA 29 CFR 1910.1200 Appendix A on the data reviewed.
2.2 Label elements
Signal word: None required
GHS pictograms: None
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: Powder or orthorhombic bipyramidal crystals
Odor: Odorless
Melting point: 884°C (1623°F)
Density: 2.671 @25 °C
Water solubility: 28.1 g/100 g at 25 °C
Viscosity: 2.48 (22% solution at 20 °C)
pH: pH of a 5% solution = 9.0 (typical value)
Not stated in the sourced records: Boiling point, Flash point, Vapor pressure, Log Pow (log Kow), Vapor density, Lower explosive limit, Upper explosive limit, Auto-ignition temperature.
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- Larranaga, M.D., Lewis, R.J. Sr., Lewis, R.A.; Hawley's Condensed Chemical Dictionary 16th Edition. John Wiley & Sons, Inc. Hoboken, NJ 2016, p. 1254
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 4-91
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Same reference as melting point above.
- View the record
- Viscosity — Hazardous Substances Data Bank (HSDB)
- Environment Canada; Tech Info for Problem Spills: Sodium sulphate (Draft) p.3 (1985)
- View the record
- pH — Hazardous Substances Data Bank (HSDB)
- Butts D, Bush DR; Sodium Sulfates and Sulfides. Kirk-Othmer Encyclopedia of Chemical Technology. (1999-2017). New York, NY: John Wiley & Sons. Online Posting Date: 19 Apr 2013
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Sodium sulfate, and where each one comes from
13 measured values for 6 properties, read from 2 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Melting point
3 records differ
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- Latent heat of fusion: 24.4 kJ at melting point
- Hazardous Substances Data Bank (HSDB)
Density
2 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 2.671 @25 °C
- PAC Chemical Database, U.S. Department of Energy
Solubility
5 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- In water, 28.1 g/100 g water at 25 °C
- Hazardous Substances Data Bank (HSDB)
- In water, 445.47 g/L at 20 °C and pH 5.23 (shake flask method)
- Hazardous Substances Data Bank (HSDB)
- Soluble in about 3.6 parts water; 1 in 2 parts water is maximum solubility at 33 °C; at 100 °C it requires 2.4 parts water
- Hazardous Substances Data Bank (HSDB)
- Soluble in glycerin; insoluble in alcohol
- Hazardous Substances Data Bank (HSDB)
- SOL IN HYDROGEN IODIDE
- Hazardous Substances Data Bank (HSDB)
Viscosity
1 record
Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.
- 2.48 (22% solution at 20 °C)
- Hazardous Substances Data Bank (HSDB)
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- pH of a 5% solution = 9.0 (typical value)
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
These are the public records read for Sodium sulfate, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Sodium sulfate
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.