Safety data sheet for Sodium hypochlorite

CAS 7681-52-9

This is the free preview of a draft SDS for Sodium hypochlorite — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Household bleach, pool sanitiser.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
7681-52-9
Molecular formula
NaOCl
Molecular weight
74.44 g/mol
Signal word
Danger

Hazard classification

  • GHS05 — Corrosive
  • GHS09 — Hazardous to the environment
  • H290: May be corrosive to metals.
  • H314: Causes severe skin burns and eye damage.
  • H400: Very toxic to aquatic life.
  • H410: Very toxic to aquatic life with long lasting effects.

Section 1 — Identification

1.1 Product identifier

Product identifier: Sodium Hypochlorite

Chemical name (IUPAC): sodium hypochlorite

CAS number: 7681-52-9

PubChem CID reference: 23665760

Synonyms: SODIUM HYPOCHLORITE; Antiformin; Clorox; Sodium oxychloride; Household bleach; Hypochlorous acid, sodium salt; Chlorox; Javex; Javelle water; Youxiaolin

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.

Classification: Corrosive to Metals, Category 1 (Met. Corr. 1) [H290]

Classification: Skin Corrosion, Category 1B (Skin Corr. 1B) [H314]

Classification: Serious Eye Damage, Category 1 (Eye Dam. 1)

Classification: Hazardous to the Aquatic Environment, Acute Hazard, Category 1 (Aquatic Acute 1) [H400]

Classification: Hazardous to the Aquatic Environment, Long-Term Hazard, Category 1 (Aquatic Chronic 1) [H410]

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS05 (Corrosion), GHS09 (Environmental Hazard)

Hazard statement: H290: May be corrosive to metals.

Hazard statement: H314: Causes severe skin burns and eye damage.

Hazard statement: H400: Very toxic to aquatic life.

Hazard statement: H410: Very toxic to aquatic life with long lasting effects.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.

Precautionary statement: P273: Avoid release to the environment.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P234: Keep only in original packaging.

Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Precautionary statement: P391: Collect spillage.

Precautionary statement: P390: Absorb spillage to prevent material damage.

Precautionary statement: P310: Immediately call a POISON CENTER or doctor/physician.

Precautionary statement: P363: Wash contaminated clothing before reuse.

Precautionary statement: P406: Store in a corrosion-resistant container with a resistant inner liner.

Precautionary statement: P405: Store locked up.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Greenish yellow liquid

Odor: Disagreeable, sweetish odor

Melting point: -30 to -20°C (solution, >10% active chlorine)

Density: 1.20–1.25 g/mL at 20°C (solution)

Water solubility: 293 g/L at 20 °C

Not stated in the sourced records: Boiling point, Flash point, Vapor pressure, Log Pow (log Kow), Vapor density, Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity, pH.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Lewis, R.J., Sr (Ed.). Hawley's Condensed Chemical Dictionary. 12th ed. New York, NY: Van Nostrand Rheinhold Co., 1993, p. 1059
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Sodium hypochlorite, and where each one comes from

10 measured values for 6 properties, read from 2 public databases. On 1 property the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

1 record

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Boiling point: 111 °C in solution
Hazardous Substances Data Bank (HSDB)

Melting point

2 records agree

Fixes the physical state at handling temperature, which the label and the transport class depend on.

MP: 18 °C /Pentahydrate/
Hazardous Substances Data Bank (HSDB)

Density

3 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

1.21 (14% aqueous solution, 20 °C)
Hazardous Substances Data Bank (HSDB)
Saturated liquid density= 66.169 lb/cu ft @ 70 °F
Hazardous Substances Data Bank (HSDB)
Density should not exceed 1.025 /Sodium hypochlorite soln, diluted/
Hazardous Substances Data Bank (HSDB)

Solubility

1 record

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

29.3 g/100 g (0 °C) in water
Hazardous Substances Data Bank (HSDB)

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Disagreeable, sweetish odor
Hazardous Substances Data Bank (HSDB)
Faint chlorine-like odor /sodium hypochlorite soln diluted/
Hazardous Substances Data Bank (HSDB)

Decomposition temperature

1 record

The temperature at which the substance breaks down, often into products more hazardous than itself.

When heated to decomposition it emits toxic fumes of Na2O and /hydrogen chloride/
Hazardous Substances Data Bank (HSDB)

These are the public records read for Sodium hypochlorite, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Sodium hypochlorite

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.