Safety data sheet for Sodium benzoate

CAS 532-32-1

This is the free preview of a draft SDS for Sodium benzoate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Food, beverage and cosmetic preservative.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
532-32-1
Molecular formula
C7H5NaO2
Molecular weight
144.10 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • H319: Causes serious eye irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Sodium Benzoate

Chemical name (IUPAC): sodium benzoate

CAS number: 532-32-1

PubChem CID reference: 517055

Synonyms: sodium benzoate; Sobenate; Antimol; Benzoic acid, sodium salt; sodium;benzoate; Benzoate sodium; Benzoate of soda; Benzoate, sodium; Natrium benzoicum; FEMA No. 3025

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows carry EU CLP (ECHA) classifications; no US-specific classification source resolved for this substance.

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H319: Causes serious eye irritation.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Solid

Appearance: White, granules or crystalline powder

Odor: Odorless

Melting point: >300°C (>572°F)

Flash point: >100°C (>212°F)

Density: 1.5 g/cm³

Water solubility: 556 g/L

Log Pow (log Kow): -2.27 (calculated)

Auto-ignition temperature: >500°C (>932°F)

Decomposition temperature: >450 °C to <475 °C, decomposes with no boiling (OECD Guideline 103 (Boiling point/boiling range))

pH: Aqueous solution is slightly alkaline to litmus, pH about 8

Not stated in the sourced records: Boiling point, Vapor pressure, Vapor density, Lower explosive limit, Upper explosive limit, Viscosity.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 1594
View the record
Flash point — Hazardous Substances Data Bank (HSDB)
Sigma-Aldrich; Safety Data Sheet for Sodium benzoate. Product Number: 71295, Version 4.6 (Revision Date 09/19/2014)
View the record
Density — Hazardous Substances Data Bank (HSDB)
ECHA; Search for Chemicals. Sodium Benzoate (CAS 532-32-1) Registered Substances Dossier. European Chemical Agency
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Same reference as density above.
View the record
pH — Hazardous Substances Data Bank (HSDB)
Same reference as odor above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • ECHA CHEM C&L backfill 2026-10-21
  • ECHA indexed CLP row
  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Sodium benzoate, and where each one comes from

9 measured values for 8 properties, read from 1 public database. Every record agrees. Follow any linked record to read the value at its source.

Boiling point

1 record

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

>450 °C to <475 °C, decomposes with no boiling (OECD Guideline 103 (Boiling point/boiling range))
Hazardous Substances Data Bank (HSDB)

Melting point

1 record

Fixes the physical state at handling temperature, which the label and the transport class depend on.

436 °C (OECD Guideline 102 (Melting point / Melting Range))
Hazardous Substances Data Bank (HSDB)

Flash point

1 record

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

Density

1 record

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

1.50 g/cu cm (OECD Guideline 109 (Density of Liquids and Solids))
Hazardous Substances Data Bank (HSDB)

Solubility

2 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 556 g/L (temperature and pH not reported)
Hazardous Substances Data Bank (HSDB)
1 g dissolves in 1.8 mL water, 1.4 mL boiling water, about 75 mL alcohol, 50 mL mixture of 47.5 mL alcohol and 3.7 mL water
Hazardous Substances Data Bank (HSDB)

pH

1 record

Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.

Aqueous solution is slightly alkaline to litmus, pH about 8
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Decomposition temperature

1 record

The temperature at which the substance breaks down, often into products more hazardous than itself.

It may emit acrid fumes when heated to decomposition (at 120 °C/248 °F)
Hazardous Substances Data Bank (HSDB)

These are the public records read for Sodium benzoate, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Sodium benzoate

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.