Safety data sheet for Salicylic acid
CAS 69-72-7
This is the free preview of a draft SDS for Salicylic acid — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Acne and exfoliating skincare, preservative.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 69-72-7
- Molecular formula
- C7H6O3
- Molecular weight
- 138.12 g/mol
- Signal word
- Danger
Hazard classification
- GHS08 — Health hazard
- GHS07 — Exclamation mark — irritant
- GHS05 — Corrosive
- H361d: Suspected of damaging the unborn child.
- H302: Harmful if swallowed.
- H318: Causes serious eye damage.
Section 1 — Identification
1.1 Product identifier
Product identifier: Salicylic Acid
Chemical name (IUPAC): 2-hydroxybenzoic acid
CAS number: 69-72-7
PubChem CID reference: 338
Synonyms: salicylic acid; 2-Hydroxybenzoic acid; o-hydroxybenzoic acid; 2-Carboxyphenol; o-Carboxyphenol; Retarder W; Rutranex; Salonil; Keralyt; Duoplant
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows carry EU CLP (ECHA) classifications; no US-specific classification source resolved for this substance.
Classification: Reproductive Toxicity, Category 2 (Repr. 2) [H361d]
Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]
Classification: Serious Eye Damage, Category 1 (Eye Dam. 1) [H318]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS08 (Health Hazard), GHS07 (Exclamation), GHS05 (Corrosion)
Hazard statement: H361d: Suspected of damaging the unborn child.
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H318: Causes serious eye damage.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P201: Obtain special instructions before use.
Precautionary statement: P202: Do not handle until all safety precautions have been read and understood.
Precautionary statement: P270: Do not eat, drink or smoke when using this product.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Precautionary statement: P308+P313: IF exposed or concerned: Get medical advice/attention.
Precautionary statement: P310: Immediately call a POISON CENTER or doctor/physician.
Precautionary statement: P330: Rinse mouth.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: White crystals, fine needles, or fluffy white crystalline powder
Odor: Synthetic acid is odorless
Boiling point: 211°C (412°F) at 26.7 hPa (reduced pressure)
Melting point: 159°C (318°F)
Flash point: 157°C (315°F) closed cup
Density: 1.443 g/cm³ at 20°C
Vapor pressure: 0.011 Pa at 25°C
Water solubility: 2,240 mg/L at 25 °C
Log Pow (log Kow): 2.26 (measured)
Vapor density: 4.8 (air = 1)
Auto-ignition temperature: 540°C (1004°F)
pH: pH of saturated solution: 2.4
Not stated in the sourced records: Lower explosive limit, Upper explosive limit, Viscosity.
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- Osol, A. and J.E. Hoover, et al. (eds.). Remington's Pharmaceutical Sciences. 15th ed. Easton, Pennsylvania: Mack Publishing Co., 1975, p. 725
- View the record
- Boiling point — Hazardous Substances Data Bank (HSDB)
- O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 2006, p. 1438
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- Same reference as boiling point above.
- View the record
- Flash point — Hazardous Substances Data Bank (HSDB)
- Fire Protection Guide to Hazardous Materials. 13 ed. Quincy, MA: National Fire Protection Association, 2002, p. 325-103
- View the record
- Density — Hazardous Substances Data Bank (HSDB)
- Lide, D.R. CRC Handbook of Chemistry and Physics 86th Edition 2005-2006. CRC Press, Taylor & Francis, Boca Raton, FL 2005, p. 3-288
- View the record
- Vapor pressure — Hazardous Substances Data Bank (HSDB)
- Daubert, T.E., R.P. Danner. Physical and Thermodynamic Properties of Pure Chemicals Data Compilation. Washington, D.C.: Taylor and Francis, 1989
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Same reference as boiling point above.
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 29
- View the record
- Vapor density — Hazardous Substances Data Bank (HSDB)
- Same reference as flash point above.
- View the record
- Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
- Same reference as flash point above.
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- ECHA CHEM C&L backfill 2026-11-03
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Salicylic acid, and where each one comes from
45 measured values for 11 properties, read from 2 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
2 records agree
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 211 °C at 20 torr
- Hazardous Substances Data Bank (HSDB)
- 211 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Melting point
6 records, 157 to 161 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
Flash point
2 records agree
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
- 315 °F (157 °C) (closed cup)
- Hazardous Substances Data Bank (HSDB)
- 157 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Auto-ignition temperature
1 record
The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.
- 1004 °F (540 °C)
- Hazardous Substances Data Bank (HSDB)
Vapour pressure
5 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 8.2X10-5 mm Hg at 25 °C
- Hazardous Substances Data Bank (HSDB)
- 0.000082 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.00008199740000000016 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.000082 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0001500124 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Vapour density
1 record
Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.
- 4.8 (Air= 1)
- Hazardous Substances Data Bank (HSDB)
Density
1 record
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 1.443 g/cu cm at 20 °C/4 °C
- Hazardous Substances Data Bank (HSDB)
Solubility
24 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Soluble in oil of turpentine, alcohol, ether
- Hazardous Substances Data Bank (HSDB)
- SLIGHTLY SOL IN TOLUENE
- Hazardous Substances Data Bank (HSDB)
- In water, 2,240 mg/L at 25 °C
- Hazardous Substances Data Bank (HSDB)
- 0.0162181009735893 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.01513561248436208 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.020417379446695295 mol/L at 30 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.014454397707459272 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.013899526312134002 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.011083104295651002 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.015299999999999994 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.016100000000000003 mol/L at 25.05 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.015135612483999996 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.013700000000000004 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.013899999999999996 mol/L at 22 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0130319572551802 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.015776112696993486 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.015135600000000003 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0162181009735893 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.01148153621496883 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.016200000000000003 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.01490292499825546 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.01621754680644647 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.011700000000000002 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0158 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
Partition coefficient (log Kow)
1 record
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 2.26
- Hazardous Substances Data Bank (HSDB)
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- pH of saturated solution: 2.4
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- SYNTHETIC ACID IS ODORLESS
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Salicylic acid, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Salicylic acid
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.