Safety data sheet for Potassium sorbate

CAS 24634-61-5

This is the free preview of a draft SDS for Potassium sorbate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Food and cosmetic preservative.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
24634-61-5
Molecular formula
C6H7KO2
Molecular weight
150.22 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Health hazard — irritant
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Potassium Sorbate

Chemical name (IUPAC): potassium (2E,4E)-hexa-2,4-dienoate

CAS number: 24634-61-5

PubChem CID reference: 23676745

Synonyms: POTASSIUM SORBATE; Sorbistat potassium; Sorbic acid potassium salt; BB Powder; Sorbic acid, potassium salt; Sorbistat-potassium; potassium (2E,4E)-hexa-2,4-dienoate; Sorbistat k; FEMA No. 2921; Potassium (E,E)-hexa-2,4-dienoate

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes this sheet resolves: Skin Irrit. 2, Eye Irrit. 2, STOT SE 3.

Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]

Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H335]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H315: Causes skin irritation.

Hazard statement: H319: Causes serious eye irritation.

Hazard statement: H335: May cause respiratory irritation.

Precautionary statement: P264+P265: Wash hands thoroughly after handling. Do not touch eyes.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.

Precautionary statement: P271: Use only outdoors or in a well-ventilated area.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Solid

Appearance: White powder

Odor: Characteristic odor

Melting point: 270°C (518°F)

Density: 1.363 at 25 °C/20 °C

Water solubility: Solubility in water at 20 °C: 58.2%; in alcohol: 6.5%

Not found in the public records searched: boiling point, flash point, vapor pressure, Log Pow (log Kow), vapor density, lower explosive limit, upper explosive limit, auto-ignition temperature, viscosity and pH. Enter these from your supplier's safety data sheet or your own test report before the draft is issued.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Osol, A. and J.E. Hoover, et al. (eds.). Remington's Pharmaceutical Sciences. 15th ed. Easton, Pennsylvania: Mack Publishing Co., 1975, p. 1222
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-462
View the record
Density — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 1613
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Same reference as density above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Potassium sorbate, and where each one comes from

9 measured values for 5 properties, read from 1 public database. Every record agrees. Follow any record to read the value at its source.

Melting point

1 record

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Density

1 record

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

5 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Solubility in water at 20 °C: 58.2%; in alcohol: 6.5%
Hazardous Substances Data Bank (HSDB)
Soluble in water at 25 °C
Hazardous Substances Data Bank (HSDB)
58.5 g in 100 cc water at 25 °C
Hazardous Substances Data Bank (HSDB)
For more Solubility (Complete) data for POTASSIUM SORBATE (6 total), please visit the HSDB record page
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Decomposition temperature

1 record

The temperature at which the substance breaks down, often into products more hazardous than itself.

When heated to decomposition it emits toxic fumes of K2O
Hazardous Substances Data Bank (HSDB)

These are the public records read for Potassium sorbate, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Potassium sorbate

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or a novel compound stops before checkout and routes to the free mixture classifier or R&D SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.