Safety data sheet for Niacinamide

CAS 98-92-0

This is the free preview of a draft SDS for Niacinamide — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Skincare serums, vitamin supplements.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
98-92-0
Molecular formula
C6H6N2O
Molecular weight
122.12 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Nicotinamide

Chemical name (IUPAC): pyridine-3-carboxamide

CAS number: 98-92-0

PubChem CID reference: 936

Synonyms: nicotinamide; niacinamide; 3-Pyridinecarboxamide; pyridine-3-carboxamide; Nicotinic acid amide; Aminicotin; Amixicotyn; Benicot; Dipegyl; Nicofort

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes this sheet resolves: Skin Irrit. 2, Eye Irrit. 2, STOT SE 3.

Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315] (single source)

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319] (single source)

Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H335] (single source)

Second-source corroboration: no second public classification source on file holds this CAS.

The rows marked (single source) rest on PubChem aggregated supplier notifications alone.

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H315: Causes skin irritation.

Hazard statement: H319: Causes serious eye irritation.

Hazard statement: H335: May cause respiratory irritation.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P271: Use only outdoors or in a well-ventilated area.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.

Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.

Precautionary statement: P332+P313: IF SKIN irritation occurs: Get medical advice/attention.

Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.

Precautionary statement: P312: Call a POISON CENTER/doctor if you feel unwell.

Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.

Precautionary statement: P405: Store locked up.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Solid

Appearance: White, powder, needles from benzene

Odor: Odorless

Boiling point: 157°C (315°F) at 0.5 hPa (reduced pressure)

Melting point: 128.8°C (264°F)

Flash point: 182°C (360°F)

Density: 1.4 g/cm³ at 25°C

Vapor pressure: 4.5 × 10⁻⁴ Pa at 25°C

Water solubility: 500,000 mg/L at 25 °C

Log Pow (log Kow): -0.37 (measured)

Vapor density: 4.2 (air = 1)

Auto-ignition temperature: 480°C (896°F)

pH: 10% "wt in vol" solution in water is neutral to litmus

Not stated in the sourced records: Lower explosive limit, Upper explosive limit, Viscosity.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Osol, A. and J.E. Hoover, et al. (eds.). Remington's Pharmaceutical Sciences. 15th ed. Easton, Pennsylvania: Mack Publishing Co., 1975, p. 950
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-474
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Flash point — EPA CompTox Chemicals Dashboard (ChemPROP)
OChem_2024_04_03, exp_prop_FLASH_POINT_v2.0
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Vapor pressure — PAC Chemical Database, U.S. Department of Energy
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Budavari, S. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 1996, p. 1114
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 19
View the record
pH — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 1213
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • PAC Chemical Database, U.S. Department of Energy
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Niacinamide, and where each one comes from

36 measured values for 9 properties, read from 3 public databases. On 5 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

3 records, 155 to 157 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

BP: 157 °C at 5X10-4 atm
Hazardous Substances Data Bank (HSDB)
155 °C at 760 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Melting point

4 records, 129 to 131 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

128.8 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Flash point

2 records, 156 to 182 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

Vapour pressure

2 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

0.000003375278999999998 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Density

3 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Specific heat = solid, 55 °C: 1.30 kJ/kg; heat of solution in water: -148 kJ/kg; heat of fusion: 381 kJ/kg; density of melt, at 150 °C: 1.19 g/cu cm
Hazardous Substances Data Bank (HSDB)

Solubility

19 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 5X10+5 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)
Very soluble in water; 1 g is soluble in 1 mL water
Hazardous Substances Data Bank (HSDB)
1 g dissolves in about 1 mL water, in 10 mL glycerol, in about 1.5 mL alcohol
Hazardous Substances Data Bank (HSDB)
Soluble in butanol, chloroform
Hazardous Substances Data Bank (HSDB)
For more Solubility (Complete) data for Nicotinamide (6 total), please visit the HSDB record page
Hazardous Substances Data Bank (HSDB)
4.073802778041127 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
4.8630556666934535 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
4.094098766038632 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
8.188197532077265 mol/L at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

pH

1 record

Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.

10% "wt in vol" solution in water is neutral to litmus
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Niacinamide, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Niacinamide

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.