Safety data sheet for n-Hexane

CAS 110-54-3

This is the free preview of a draft SDS for n-Hexane — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Extraction, adhesives, industrial cleaning.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
110-54-3
Molecular formula
C6H14
Molecular weight
86.18 g/mol
Signal word
Danger

Hazard classification

  • GHS02 — Flammable
  • GHS07 — Health hazard — irritant
  • GHS08 — Serious health hazard
  • GHS09 — Hazardous to the environment
  • H225: Highly flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.
  • H361f: Suspected of damaging fertility.
  • H373: May cause damage to organs through prolonged or repeated exposure.
  • H411: Toxic to aquatic life with long lasting effects.

Section 1 — Identification

1.1 Product identifier

Product identifier: Hexane

Chemical name (IUPAC): hexane

CAS number: 110-54-3

PubChem CID reference: 8058

Synonyms: HEXANE; n-Hexane; Skellysolve B; Esani; Gettysolve-B; Hexyl hydride; Dipropyl; Hexanen; Heksan; normal-hexane

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes this sheet resolves: Flam. Liq. 2, Asp. Tox. 1, Skin Irrit. 2, STOT SE 3, STOT RE 2.

Classification: Flammable Liquid, Category 2 (Flam. Liq. 2) [H225]

Classification: Aspiration Hazard, Category 1 (Asp. Tox. 1) [H304]

Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]

Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H336]

Classification: Specific Target Organ Toxicity, Repeated Exposure, Category 2 (STOT RE 2) [H373]

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS02 (Flammable), GHS07 (Exclamation), GHS08 (Health Hazard), GHS09 (Environmental Hazard)

Hazard statement: H225: Highly flammable liquid and vapor.

Hazard statement: H304: May be fatal if swallowed and enters airways.

Hazard statement: H315: Causes skin irritation.

Hazard statement: H336: May cause drowsiness or dizziness.

Hazard statement: H361f: Suspected of damaging fertility.

Hazard statement: H373: May cause damage to organs through prolonged or repeated exposure.

Hazard statement: H411: Toxic to aquatic life with long lasting effects.

Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.

Precautionary statement: P264+P265: Wash hands thoroughly after handling. Do not touch eyes.

Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P301+P316: IF SWALLOWED: Get emergency medical help immediately.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Liquid

Odor: Gasoline-like odor

Boiling point: 68.7°C (156°F) at 1013 hPa

Melting point: -95.3°C (-140°F)

Flash point: -22°C (-8°F) closed cup

Density: 0.6606 g/cm³ at 25°C

Vapor pressure: 160 hPa at 20°C

Water solubility: Miscible

Log Pow (log Kow): 3.90

Vapor density: 3 (air = 1)

Lower explosive limit: 1.1%

Upper explosive limit: 7.5%

Auto-ignition temperature: 225°C (437°F)

Viscosity: 0.38 cP at 15°C

pH: Not available

Occupational exposure limits for n-Hexane

The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.

OSHA PEL — TWA (8 h)

500 ppm (1800 mg/m³)

OSHA Annotated PEL Table Z-1

NIOSH REL — TWA (up to 10 h)

50 ppm (180 mg/m³)

OSHA Annotated PEL Table Z-1 (NIOSH REL column)

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
NIOSH. NIOSH Pocket Guide to Chemical Hazards. Department of Health & Human Services, Centers for Disease Control & Prevention. National Institute for Occupational Safety & Health. DHHS (NIOSH) Publication No. 2010-168 (2010). Available from: https://www.cdc.gov/niosh/npg
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.) CRC Handbook of Chemistry and Physics. 91st ed. Boca Raton, FL: CRC Press Inc., 2010-2011, p. 3-282
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Flash point — Hazardous Substances Data Bank (HSDB)
National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-71
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 2006, p. 811
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 24
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
Same reference as flash point above.
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Same reference as water solubility above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • Hazardous Substances Data Bank (HSDB)
  • OSHA Annotated PEL Table Z-1
  • OSHA Annotated PEL Table Z-1 (NIOSH REL column)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for n-Hexane, and where each one comes from

33 measured values for 12 properties, read from 4 public databases. On 5 properties the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.

Boiling point

4 records agree

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

4 records, -139 to -95 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Flash point

3 records agree

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

-7 °F (-22 °C) (Closed cup)
Hazardous Substances Data Bank (HSDB)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Explosive limits

1 record

The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.

1.1-7.5% by volume in air at ambient temp /from table/
Hazardous Substances Data Bank (HSDB)

Vapour pressure

5 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

Vapor pressure: 120 mm Hg at 20 °C, 190 mm Hg at 30 °C
Hazardous Substances Data Bank (HSDB)
75 [mm Hg] @9.8000000000000007 °C
PAC Chemical Database, U.S. Department of Energy

Vapour density

2 records differ

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

4 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

5 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 9.5 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)
9.5 to 13 mg/L at 20 °C in distilled water, 75.5 mg/L at 20 °C in salt water
Hazardous Substances Data Bank (HSDB)
Very soluble in ethanol; soluble in ethyl ether, chloroform
Hazardous Substances Data Bank (HSDB)
Miscible with alcohol, chloroform, and ether
Hazardous Substances Data Bank (HSDB)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

Viscosity

2 records differ

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for n-Hexane, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for n-Hexane

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or a novel compound stops before checkout and routes to the free mixture classifier or R&D SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.