Safety data sheet for Methyl ethyl ketone
CAS 78-93-3
This is the free preview of a draft SDS for Methyl ethyl ketone — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Coatings, printing inks, cleaning.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 78-93-3
- Molecular formula
- C4H8O
- Molecular weight
- 72.11 g/mol
- Signal word
- Danger
Hazard classification
- GHS02 — Flammable
- GHS07 — Exclamation mark — irritant
- H225: Highly flammable liquid and vapor.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
Section 1 — Identification
1.1 Product identifier
Product identifier: Methyl Ethyl Ketone
Chemical name (IUPAC): butan-2-one
CAS number: 78-93-3
PubChem CID reference: 6569
Synonyms: 2-Butanone; METHYL ETHYL KETONE; Butan-2-one; Butanone; Ethyl methyl ketone; Methylethyl ketone; Meetco; Methyl acetone; Methylethylketone; 3-Butanone
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows carry EU CLP (ECHA) classifications; no US-specific classification source resolved for this substance.
Classification: Flammable Liquid, Category 2 (Flam. Liq. 2) [H225]
Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]
Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H336]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS02 (Flammable), GHS07 (Exclamation)
Hazard statement: H225: Highly flammable liquid and vapor.
Hazard statement: H319: Causes serious eye irritation.
Hazard statement: H336: May cause drowsiness or dizziness.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Precautionary statement: P271: Use only outdoors or in a well-ventilated area.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P240: Ground/bond container and receiving equipment.
Precautionary statement: P241: Use explosion-proof electrical, ventilating, and lighting equipment.
Precautionary statement: P242: Use only non-sparking tools.
Precautionary statement: P243: Take precautionary measures against static discharge.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Precautionary statement: P370+P378: In case of fire: Use appropriate extinguishing media.
Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.
Precautionary statement: P312: Call a POISON CENTER/doctor if you feel unwell.
Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Precautionary statement: P403+P235: Store in a well-ventilated place. Keep cool.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Liquid
Appearance: Colorless liquid
Odor: Acetone-like odor
Boiling point: 80°C (176°F) at 1013 hPa
Melting point: -86.7°C (-124°F)
Flash point: -9°C (16°F) closed cup
Density: 0.805 at 20 °C/4 °C; 0.7997 at 25 °C/4 °C; 0.8255 at 0 °C/4 °C
Vapor pressure: 103 hPa at 20°C
Water solubility: 223,000 mg/L at 25 °C
Log Pow (log Kow): 0.29 (measured)
Vapor density: 2.42 (air = 1)
Lower explosive limit: 1.4% (v/v in air)
Upper explosive limit: 11.4% (v/v in air)
Auto-ignition temperature: 505°C (941°F)
Viscosity: 0.4 cP at 25°C
Not stated in the sourced records: pH.
Occupational exposure limits for Methyl ethyl ketone
The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.
OSHA PEL — TWA (8 h)
200 ppm (590 mg/m³)
OSHA Annotated PEL Table Z-1
NIOSH REL — TWA (up to 10 h)
200 ppm (590 mg/m³)
OSHA Annotated PEL Table Z-1 (NIOSH REL column)
NIOSH REL — STEL (15 min)
300 ppm
OSHA Annotated PEL Table Z-1 (NIOSH REL column)
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 1126
- View the record
- Boiling point — Hazardous Substances Data Bank (HSDB)
- Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-78
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- Same reference as boiling point above.
- View the record
- Flash point — Hazardous Substances Data Bank (HSDB)
- National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-85
- View the record
- Density — Hazardous Substances Data Bank (HSDB)
- Lewis, R.J. Sr.; Hawley's Condensed Chemical Dictionary 15th Edition. John Wiley & Sons, Inc. New York, NY 2007, p. 829
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Same reference as odor above.
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 9
- View the record
- Lower explosive limit — Hazardous Substances Data Bank (HSDB)
- Pohanish, R.P. (ed). Sittig's Handbook of Toxic and Hazardous Chemical Carcinogens 6th Edition Volume 1: A-K, Volume 2: L-Z. William Andrew, Waltham, MA 2012, p. 1802
- View the record
- Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
- Same reference as lower explosive limit above.
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- Hazardous Substances Data Bank (HSDB)
- OSHA Annotated PEL Table Z-1
- OSHA Annotated PEL Table Z-1 (NIOSH REL column)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Methyl ethyl ketone, and where each one comes from
69 measured values for 12 properties, read from 5 public databases. On 7 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
6 records, 79 to 80 °C
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 175 °F
- NIOSH Pocket Guide
- 79.59 °C @760 [mm Hg]
- PAC Chemical Database, U.S. Department of Energy
- 79.59 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 79.3 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Melting point
7 records, -87 to 25 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- -123 °F
- NIOSH Pocket Guide
- -86 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Flash point
9 records, -10 to 9 °C
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
- 16 °F (-9 °C) (Closed cup)
- Hazardous Substances Data Bank (HSDB)
- 16 °F
- NIOSH Pocket Guide
- -10 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- -9 °C at 759.812 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Auto-ignition temperature
1 record
The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.
Explosive limits
1 record
The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.
- LEL = 1.4% at 93 °C; UEL = 11.4% at 93 °C
- Hazardous Substances Data Bank (HSDB)
Vapour pressure
15 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 90.6 mm Hg at 25 °C
- Hazardous Substances Data Bank (HSDB)
- 78 mmHg
- NIOSH Pocket Guide
- 75 [mm Hg] @21.2 °C
- PAC Chemical Database, U.S. Department of Energy
- 90.6073688 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 78.756405 mmHg at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 90.18 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 97.97 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 90.5941 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 90.6 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 100 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 77.5 mmHg at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 90.6 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 78.75651 mmHg at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 78 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Vapour density
2 records differ
Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.
- 2.41 (Air= 1)
- Hazardous Substances Data Bank (HSDB)
Density
5 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 0.805 at 20 °C/4 °C; 0.7997 at 25 °C/4 °C; 0.8255 at 0 °C/4 °C
- Hazardous Substances Data Bank (HSDB)
- Bulk density: 6.71 lb/gal at 20 °C
- Hazardous Substances Data Bank (HSDB)
- 0.7999 @25 °C
- PAC Chemical Database, U.S. Department of Energy
Solubility
16 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Constant boiling mixture with water, BP 73.4 °C, contains 88.7% methyl ethyl ketone (MEK); Solubility of water in MEK is 12.5% at 25 °C
- Hazardous Substances Data Bank (HSDB)
- In water, 2.23X10+5 mg/L at 25 °C
- Hazardous Substances Data Bank (HSDB)
- In water, 3.13X10+5 mg/L at 10 °C; 2.11X10+5 mg/L at 25 °C; 1.6X10+5 mg/L at 90 °C
- Hazardous Substances Data Bank (HSDB)
- Soluble in benzene, alcohol, and ether; miscible with oils
- Hazardous Substances Data Bank (HSDB)
- Miscible with ethanol, ether, acetone, benzene, chloroform
- Hazardous Substances Data Bank (HSDB)
- 3.31131 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.09742 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.31131 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.0903 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.20196 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.09263 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.92621 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 4.0218 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.09263 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
Partition coefficient (log Kow)
3 records differ
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 0.29
- Hazardous Substances Data Bank (HSDB)
- 0.29 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.29 Log10 unitless at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Viscosity
1 record
Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.
- 0.40 cP at 25 °C
- Hazardous Substances Data Bank (HSDB)
Odour
3 records, each a different case
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Acetone-like odor
- Hazardous Substances Data Bank (HSDB)
- Sweet, pleasant, pungent
- Hazardous Substances Data Bank (HSDB)
- Moderately sharp, fragrant, mint- or acetone-like odor
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Methyl ethyl ketone, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Methyl ethyl ketone
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.