Safety data sheet for Linalool
CAS 78-70-6
This is the free preview of a draft SDS for Linalool — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Lavender fragrance, CLP-listed allergen.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 78-70-6
- Molecular formula
- C10H18O
- Molecular weight
- 154.25 g/mol
- Signal word
- Warning
Hazard classification
- GHS07 — Exclamation mark — irritant
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H317: May cause an allergic skin reaction.
- H227: Combustible liquid.
Section 1 — Identification
1.1 Product identifier
Product identifier: Linalool
Chemical name (IUPAC): 3,7-dimethylocta-1,6-dien-3-ol
CAS number: 78-70-6
PubChem CID reference: 6549
Synonyms: Linalool; 3,7-Dimethylocta-1,6-dien-3-ol; Linalol; LINALYL ALCOHOL; beta-Linalool; 3,7-Dimethyl-1,6-octadien-3-ol; allo-Ocimenol; 1,6-Octadien-3-ol, 3,7-dimethyl-; dl-Linalool; (+-)-Linalool
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]
Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]
Classification: Skin Sensitisation, Category 1 (Skin Sens. 1) [H317]
Classification: Flammable Liquid, Category 4 (Flam. Liq. 4) [H227]
2.2 Label elements
Signal word: Warning
GHS pictograms: GHS07 (Exclamation)
Hazard statement: H315: Causes skin irritation.
Hazard statement: H319: Causes serious eye irritation.
Hazard statement: H317: May cause an allergic skin reaction.
Hazard statement: H227: Combustible liquid.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P272: Contaminated work clothing should not be allowed out of the workplace.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.
Precautionary statement: P370+P378: In case of fire: Use appropriate extinguishing media.
Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.
Precautionary statement: P332+P313: IF SKIN irritation occurs: Get medical advice/attention.
Precautionary statement: P333+P313: IF SKIN irritation or rash occurs: Get medical advice/attention.
Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.
Precautionary statement: P403: Store in a well-ventilated place.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Liquid
Appearance: Colorless liquid
Odor: Odor similar to that of bergamot oil and French lavender
Boiling point: 197°C (387°F) at 1013 hPa
Melting point: Below -74°C (freezing point)
Flash point: 71°C (160°F) closed cup
Density: 0.87 g/cm³ at 15°C
Vapor pressure: 0.2 hPa at 23.5°C
Water solubility: 1590 mg/L at 25 °C
Log Pow (log Kow): 2.97 (measured)
Auto-ignition temperature: 235°C (455°F)
Viscosity: 4.465 mPa s at 25 °C (dynamic)
Not stated in the sourced records: Vapor density, Lower explosive limit, Upper explosive limit, pH.
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- Lewis, R.J. Sr. (ed) Sax's Dangerous Properties of Industrial Materials. 12th Edition. Wiley-Interscience, Wiley & Sons, Inc. Hoboken, NJ. 2012, p. 2742
- View the record
- Boiling point — EPA CompTox Chemicals Dashboard (ChemPROP)
- OChem_2024_04_03, exp_prop_BOILING_POINT_v2.0
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- ECHA; Search for Chemicals. Linalool (CAS 78-70-6) Registered Substances Dossier. European Chemical Agency
- View the record
- Flash point — Hazardous Substances Data Bank (HSDB)
- National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-79
- View the record
- Density — Hazardous Substances Data Bank (HSDB)
- Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-338
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- SRI Consulting. 2011 Directory of Chemical Producers United States. SRI Consulting, Menlo Park, CA 2011, p. 728
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Li J et al; Environ International 24: 353-358 (1998)
- View the record
- Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
- Same reference as flash point above.
- View the record
- Viscosity — Hazardous Substances Data Bank (HSDB)
- Same reference as melting point above.
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- EPA CompTox Chemicals Dashboard (ChemPROP)
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Linalool, and where each one comes from
51 measured values for 10 properties, read from 2 public databases. On 6 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
6 records, 194 to 199 °C
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 196.3 °C at 744.062 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 197 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 194 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 199 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Melting point
3 records, -74 to 25 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- Freezing point: below -74 °C /OECD Guideline 102 (Melting point / Melting Range)/
- Hazardous Substances Data Bank (HSDB)
- 25 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Flash point
7 records, 71 to 85 °C
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
- 78 °C (172 °F) - closed cup
- Hazardous Substances Data Bank (HSDB)
- 160 °F (71 °C) (closed cup)
- Hazardous Substances Data Bank (HSDB)
- 77.2 °C at 759.813 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 71 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 75 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Auto-ignition temperature
1 record
The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.
- 455 °F (235 °C)
- Hazardous Substances Data Bank (HSDB)
Vapour pressure
8 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 0.159 mm Hg at 23.5 °C
- Hazardous Substances Data Bank (HSDB)
- 0.159013144 mmHg at 23.5 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.20251674 mmHg at 24.85 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.1589 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.16 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.159993 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.159 mmHg at 23.5 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.15751302 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Density
2 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 0.865 at 15 °C
- Hazardous Substances Data Bank (HSDB)
- Density: 0.870 g/cu cm at 15 °C/4 °C
- Hazardous Substances Data Bank (HSDB)
Solubility
13 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- In water, 1590 mg/L at 25 °C
- Hazardous Substances Data Bank (HSDB)
- Soluble in alcohol, ether, fixed oils, propylene glycol; insoluble in glycerin
- Hazardous Substances Data Bank (HSDB)
- 0.0103077 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0102329 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0102329 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0103015 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.01011 mol/L at 25 °C, pH 7
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0103276 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0103039 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0102 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0103039 mol/L at 20 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0102334 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0103726 mol/L at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Partition coefficient (log Kow)
6 records differ
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 2.97
- Hazardous Substances Data Bank (HSDB)
- 2.84 Log10 unitless at 25 °C, pH 7
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.9 Log10 unitless at 20 °C, pH 7
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 692 Log10 unitless at 25 °C, pH 7
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.97 Log10 unitless at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 2.97 Log10 unitless
- EPA CompTox Chemicals Dashboard (ChemPROP)
Viscosity
1 record
Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.
- 4.465 mPa s at 25 °C (dynamic)
- Hazardous Substances Data Bank (HSDB)
Odour
4 records, each a different case
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Odor similar to that of bergamot oil and French lavender
- Hazardous Substances Data Bank (HSDB)
- Typical floral odor free from camphoraceous and terpenic notes
- Hazardous Substances Data Bank (HSDB)
- Floral, spicy, wood odor
- Hazardous Substances Data Bank (HSDB)
- Flowery-fresh odor and reminiscent of Lily of the Valley
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Linalool, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Linalool
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.