Safety data sheet for Isopropyl palmitate

CAS 142-91-6

This is the free preview of a draft SDS for Isopropyl palmitate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Cosmetic emollient, massage oils, fragrance carrier.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
142-91-6
Molecular formula
C19H38O2
Molecular weight
298.5 g/mol
Signal word
None required — not classified

Hazard classification

  • Not Classified

Section 1 — Identification

1.1 Product identifier

Product identifier: Isopropyl Palmitate

Chemical name (IUPAC): propan-2-yl hexadecanoate

CAS number: 142-91-6

PubChem CID reference: 8907

Synonyms: ISOPROPYL PALMITATE; Isopropyl hexadecanoate; Hexadecanoic acid, 1-methylethyl ester; Isopalm; Emerest 2316; Deltyl; Isopal; Propal; Wickenol 111; Deltyl prime

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification: Not classified as hazardous according to the sources named below.

2.2 Label elements

Signal word: Not available

GHS pictograms: None

Hazard statement: Not classified

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Colorless liquid

Odor: Almost odorless

Boiling point: 160°C (320°F) at 2.7 hPa (reduced pressure)

Melting point: 13.5°C (56°F)

Density: 0.852 g/cm³ at 25°C

Vapor pressure: 0.0075 Pa at 25°C

Log Pow (log Kow): 8.2 (calculated)

Not stated in the sourced records: Flash point, Water solubility, Vapor density, Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity, pH.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Personal Care Products Council; Cosmeticsinfo.org. Washington, DC. Available at, as of May 25 2010: https://www.cosmeticsinfo.org
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
Lide, D.R. CRC Handbook of Chemistry and Physics 88th Edition 2007-2008. CRC Press, Taylor & Francis, Boca Raton, FL 2007, p. 3-316
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Vapor pressure — Hazardous Substances Data Bank (HSDB)
Boublik, T., Fried, V., and Hala, E., The Vapour Pressures of Pure Substances. Second Revised Edition. Amsterdam: Elsevier, 1984, p. 913
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Isopropyl palmitate, and where each one comes from

8 measured values for 6 properties, read from 1 public database. On 1 property the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

1 record

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

1 record

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Vapour pressure

1 record

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

5.59X10-5 mm Hg at 25 °C (extrapolated)
Hazardous Substances Data Bank (HSDB)

Density

2 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Density: 0.8404 g/cu cm at 38 °C
Hazardous Substances Data Bank (HSDB)

Solubility

2 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Very soluble in acetone, benzene, ether, ethanol
Hazardous Substances Data Bank (HSDB)
Soluble in 4 parts 90% alcohol; soluble in mineral and fixed oils
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Isopropyl palmitate, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Isopropyl palmitate

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.