Safety data sheet for Isobutane

CAS 75-28-5

This is the free preview of a draft SDS for Isobutane — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Aerosol propellant, lighter and camping fuel.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
75-28-5
Molecular formula
C4H10
Molecular weight
58.12 g/mol
Signal word
Danger

Hazard classification

  • GHS02 — Flammable
  • GHS04 — Gas under pressure
  • H220: Extremely flammable gas.
  • H280: Contains gas under pressure; may explode if heated.

Section 1 — Identification

1.1 Product identifier

Product identifier: Isobutane

Chemical name (IUPAC): 2-methylpropane

CAS number: 75-28-5

PubChem CID reference: 6360

Synonyms: ISOBUTANE; 2-Methylpropane; Trimethylmethane; 1,1-Dimethylethane; iso-butane; R 600a; Caswell No. 503A; R-600a; HSDB 608; EINECS 200-857-2

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.

Classification: Flammable Gas, Category 1 (Flam. Gas 1) [H220]

Classification: Gas Under Pressure (Press. Gas (Liquefied)) [H280]

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS02 (Flammable), GHS04 (Compressed Gas)

Hazard statement: H220: Extremely flammable gas.

Hazard statement: H280: Contains gas under pressure; may explode if heated.

Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Precautionary statement: P377: Leaking gas fire: Do not extinguish, unless leak can be stopped safely.

Precautionary statement: P381: In case of leakage, eliminate all ignition sources.

Precautionary statement: P410+P403: Protect from sunlight. Store in a well-ventilated place.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Gas

Appearance: Gas

Odor: Gasoline-like or natural gas odor

Boiling point: -11.8°C (11°F) at 1013 hPa

Melting point: -138.3°C (-217°F)

Flash point: -83°C (-117°F) closed cup

Density: 0.5509 g/cm³ at 25°C

Vapor pressure: 3480 hPa at 25°C

Water solubility: 48.9 mg/L at 25 °C

Log Pow (log Kow): 2.76 (measured)

Vapor density: 2.06 (air = 1)

Lower explosive limit: 1.6% (v/v in air)

Upper explosive limit: 8.4% (v/v in air)

Auto-ignition temperature: 460°C (860°F)

Viscosity: 0.24 cP at -10°C

Not stated in the sourced records: pH.

Occupational exposure limits for Isobutane

The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.

NIOSH REL — TWA (up to 10 h)

800 ppm (1900 mg/m³)

NIOSH Pocket Guide to Chemical Hazards

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
NIOSH. NIOSH Pocket Guide to Chemical Hazards. Department of Health & Human Services, Centers for Disease Control & Prevention. National Institute for Occupational Safety & Health. DHHS (NIOSH) Publication No. 2010-168 (2010). Available from: https://www.cdc.gov/niosh/npg
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-326
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Flash point — EPA CompTox Chemicals Dashboard (ChemPROP)
OChem_2024_04_03, exp_prop_FLASH_POINT_v2.0
View the record
Density — Hazardous Substances Data Bank (HSDB)
Riddick, J.A., W.B. Bunger, Sakano T.K. Techniques of Chemistry 4th ed., Volume II. Organic Solvents. New York, NY: John Wiley and Sons., 1985, p. 80
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
McAuliffe C; J Phys Chem 70: 1267-75 (1966)
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 10
View the record
Lower explosive limit — Hazardous Substances Data Bank (HSDB)
Lewis, R.J. Sr. (ed) Sax's Dangerous Properties of Industrial Materials. 11th Edition. Wiley-Interscience, Wiley & Sons, Inc. Hoboken, NJ. 2004, p. 2516
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-74
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Same reference as density above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • NIOSH Pocket Guide to Chemical Hazards
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Isobutane, and where each one comes from

74 measured values for 12 properties, read from 5 public databases. On 7 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

10 records, -161 to 0 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

10 records, -188 to -138 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Flash point

7 records, -104 to -60 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

-82.99 °C (-117.38 °F) - closed cup
Hazardous Substances Data Bank (HSDB)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

860 °F (460 °C) (Closed cup)
Hazardous Substances Data Bank (HSDB)

Explosive limits

1 record

The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.

Vapour pressure

11 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

2610 mm Hg (348.1 kPa) at 25 °C; 391.02 mm Hg (52.132 kPa) at -27.57 °C
Hazardous Substances Data Bank (HSDB)
(70 °F): 3.1 atm
NIOSH Pocket Guide
2610.965822 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
2356 mmHg at 21.1 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
2280.18848 mmHg at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
2610 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Vapour density

2 records differ

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

4 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

0.55092 g/cu cm at 25 °C; 0.55711 g/cu cm at 20 °C; 0.61415 at -29.5 °C
Hazardous Substances Data Bank (HSDB)
2.06(relative gas density)
NIOSH Pocket Guide

Solubility

17 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 48.9 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)
Soluble in ethanol, ether, chloroform
Hazardous Substances Data Bank (HSDB)
0.00105292 mol/L at 25 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
0.000920446 mol/L at 20 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
0.00103916 mol/L at 25 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
0.00281838 mol/L
EPA CompTox Chemicals Dashboard (ChemPROP)
0.000841305 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

8 records differ

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

2.31 Log10 unitless at 20 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
1.81 Log10 unitless at 20 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
1.09 Log10 unitless at 20 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
2.8 Log10 unitless at 20 °C, pH 7
EPA CompTox Chemicals Dashboard (ChemPROP)
2.8 Log10 unitless
EPA CompTox Chemicals Dashboard (ChemPROP)

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Gasoline-like or natural gas odor
Hazardous Substances Data Bank (HSDB)

These are the public records read for Isobutane, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Isobutane

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.