Safety data sheet for Iron oxide
CAS 1309-37-1
This is the free preview of a draft SDS for Iron oxide — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Pigment, cosmetics, polishing compound.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 1309-37-1
- Molecular formula
- Fe2O3
- Molecular weight
- 159.69 g/mol
- Signal word
- None required — not classified
Section 1 — Identification
1.1 Product identifier
Product identifier: Iron trioxide
Chemical name (IUPAC): oxo(oxoferriooxy)iron
CAS number: 1309-37-1
PubChem CID reference: 518696
Synonyms: Iron trioxide; Iron oxide, red; iron(3+) oxide; iron (III) oxide; Anhydrous Ferric Oxide; Ferrum Oxydatum; Iron oxide,; Anhydrous Iron (III) Oxide; Hematite 8124; Anhydrous Iron (III)
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The not-classified determination follows a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Not classified. This substance meets no hazard class criteria of OSHA 29 CFR 1910.1200 Appendix A on the data reviewed.
2.2 Label elements
Signal word: None required
GHS pictograms: None
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: Reddish-brown to black crystals or powder
Melting point: 1565°C
Density: 5.25 g/cm³
Vapor pressure: Negligible (approx. 0 mmHg at 20°C)
Water solubility: Insoluble in water
Not stated in the sourced records: Odor, Boiling point, Flash point, Log Pow (log Kow), Vapor density, Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity, pH.
Occupational exposure limits for Iron oxide
The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.
OSHA PEL — TWA (8 h)
10 mg/m³
NIOSH Pocket Guide to Chemical Hazards, reproducing the OSHA PEL
NIOSH REL — TWA (up to 10 h)
5 mg/m³
OSHA Annotated PEL Table Z-1 (NIOSH REL column)
Where each value came from
- Density — Hazardous Substances Data Bank (HSDB)
- Lide, D.R. CRC Handbook of Chemistry and Physics 88th Edition 2007-2008. CRC Press, Taylor & Francis, Boca Raton, FL 2007, p. 4-69
- View the record
- Vapor pressure — Hazardous Substances Data Bank (HSDB)
- NIOSH. NIOSH Pocket Guide to Chemical Hazards & Other Databases CD-ROM. Department of Health & Human Services, Centers for Disease Prevention & Control. National Institute for Occupational Safety & Health. DHHS (NIOSH) Publication No. 2005-151 (2005)
- View the record
- Water solubility — The National Institute for Occupational Safety and Health (NIOSH)
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- Hazardous Substances Data Bank (HSDB)
- NIOSH Pocket Guide to Chemical Hazards, reproducing the OSHA PEL
- OSHA Annotated PEL Table Z-1 (NIOSH REL column)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
- The National Institute for Occupational Safety and Health (NIOSH)
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Iron oxide, and where each one comes from
12 measured values for 4 properties, read from 3 public databases. On 3 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Melting point
4 records, 1462 to 1565 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- 2664 °F
- NIOSH Pocket Guide
- 2849 °F
- NIOSH Pocket Guide
Vapour pressure
3 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 0 mm Hg (approximate)
- Hazardous Substances Data Bank (HSDB)
- 0 mmHg (approx)
- NIOSH Pocket Guide
- 0 mmHg (approx)
- OSHA Occupational Chemical Database
Density
3 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 5.25 g/cu cm
- Hazardous Substances Data Bank (HSDB)
Solubility
2 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Soluble in acids; insoluble in water, alcohol, ether
- Hazardous Substances Data Bank (HSDB)
- Insoluble
- NIOSH Pocket Guide
These are the public records read for Iron oxide, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Iron oxide
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.