Safety data sheet for Hydrogen peroxide

CAS 7722-84-1

This is the free preview of a draft SDS for Hydrogen peroxide — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Disinfectant, bleaching, wound care.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
7722-84-1
Molecular formula
H2O2
Molecular weight
34.015 g/mol
Signal word
Danger

Hazard classification

  • GHS03 — Oxidising
  • GHS05 — Corrosive
  • GHS07 — Exclamation mark — irritant
  • H271: May cause fire or explosion; strong oxidizer.
  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.
  • H332: Harmful if inhaled.
  • H335: May cause respiratory irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Hydrogen Peroxide

Chemical name (IUPAC): hydrogen peroxide

CAS number: 7722-84-1

PubChem CID reference: 784

Synonyms: hydrogen peroxide; oxydol; perhydrol; Superoxol; Interox; Hydrogen dioxide; Inhibine; Kastone; Peroxaan; Albone

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.

Classification: Oxidising Liquid or Solid, Category 1 (Ox. Liq. 1) [H271]

Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]

Classification: Skin Corrosion, Category 1A (Skin Corr. 1A) [H314]

Classification: Serious Eye Damage, Category 1 (Eye Dam. 1)

Classification: Acute Toxicity, Category 4 — Inhalation (Acute Tox. 4 (Inhalation)) [H332]

Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H335]

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS03 (Oxidizing), GHS05 (Corrosion), GHS07 (Exclamation)

Hazard statement: H271: May cause fire or explosion; strong oxidizer.

Hazard statement: H302: Harmful if swallowed.

Hazard statement: H314: Causes severe skin burns and eye damage.

Hazard statement: H332: Harmful if inhaled.

Hazard statement: H335: May cause respiratory irritation.

Precautionary statement: P220: Keep away from clothing and other combustible materials.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.

Precautionary statement: P271: Use only outdoors or in a well-ventilated area.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P270: Do not eat, drink or smoke when using this product.

Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.

Precautionary statement: P283: Wear fire resistant or flame retardant clothing.

Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Precautionary statement: P371+P380+P375: In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.

Precautionary statement: P370+P378: In case of fire: Use appropriate extinguishing media.

Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.

Precautionary statement: P306+P360: IF ON CLOTHING: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.

Precautionary statement: P310: Immediately call a POISON CENTER or doctor/physician.

Precautionary statement: P363: Wash contaminated clothing before reuse.

Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.

Precautionary statement: P405: Store locked up.

Precautionary statement: P420: Store separately.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Colorless liquid

Odor: Slightly sharp odor

Boiling point: 150.2°C (302°F) at 1013 hPa (pure substance)

Melting point: -0.4°C (31°F) (pure substance)

Density: 1.44 g/cm³ at 25°C (pure substance)

Vapor pressure: 2.6 hPa at 25°C

Water solubility: Miscible

Log Pow (log Kow): -1.36

Vapor density: 1.15 (air = 1) (pure substance)

Viscosity: 1.82 cP at 0°C

pH: Weak acid; H2O2 concn wt% = 35, 50, 70, 90; corresponding true pH: 4.6, 4.3, 4.4, 5.1

Not stated in the sourced records: Flash point, Lower explosive limit, Upper explosive limit, Auto-ignition temperature.

Occupational exposure limits for Hydrogen peroxide

The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.

OSHA PEL — TWA (8 h)

1 ppm (1.4 mg/m³)

OSHA Annotated PEL Table Z-1

NIOSH REL — TWA (up to 10 h)

1 ppm (1.4 mg/m³)

OSHA Annotated PEL Table Z-1 (NIOSH REL column)

Where each value came from

Boiling point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 4-67
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 889
View the record
Log Pow (log Kow) — EPA CompTox Chemicals Dashboard (ChemPROP)
PubChem_2024_11_27, exp_prop_LOG_KOW_v2.0
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Goor G et al; Hydrogen Peroxide. Ullmann's Encyclopedia of Industrial Chemistry. 7th ed. (1999-2017). New York, NY: John Wiley & Sons. Online Posting Date: 15 Apr 2007
View the record
pH — Hazardous Substances Data Bank (HSDB)
Eul W et al; Hydrogen Peroxide. Kirk-Othmer Encyclopedia of Chemical Technology. (1999-2017). New York, NY: John Wiley & Sons. Online Posting Date: 17 Aug 2001
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • OSHA Annotated PEL Table Z-1
  • OSHA Annotated PEL Table Z-1 (NIOSH REL column)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Hydrogen peroxide, and where each one comes from

55 measured values for 10 properties, read from 5 public databases. On 4 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

11 records, 108 to 152 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

152.222 °C at 760 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)
125.556 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
141 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Melting point

8 records, -40 to 2 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

1.94444 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Explosive limits

1 record

The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.

For more Explosive Limits and Potential (Complete) data for Hydrogen peroxide (18 total), please visit the HSDB record page
Hazardous Substances Data Bank (HSDB)

Vapour pressure

16 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

(86 °F): 5 mmHg
NIOSH Pocket Guide
1.97 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
1.97 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)
675.0558 mmHg at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
5 mmHg at 30 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Density

5 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Density, solid: 1.71 g/cc
Hazardous Substances Data Bank (HSDB)

Solubility

10 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 1X10+6 mgL at 25 °C
Hazardous Substances Data Bank (HSDB)
For more Solubility (Complete) data for Hydrogen peroxide (6 total), please visit the HSDB record page
Hazardous Substances Data Bank (HSDB)
29.3997 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

-1.36 Log10 unitless
EPA CompTox Chemicals Dashboard (ChemPROP)

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

1.819 cP at 0 °C; 1.249 cP at 20 °C
Hazardous Substances Data Bank (HSDB)

pH

1 record

Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.

Weak acid; H2O2 concn wt% = 35, 50, 70, 90; corresponding true pH: 4.6, 4.3, 4.4, 5.1
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Odorless, or having an odor resembling that of ozone
Hazardous Substances Data Bank (HSDB)

These are the public records read for Hydrogen peroxide, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Hydrogen peroxide

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.