Safety data sheet for Glycolic acid
CAS 79-14-1
This is the free preview of a draft SDS for Glycolic acid — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Exfoliating skincare, descalers, cleaners.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 79-14-1
- Molecular formula
- C2H4O3
- Molecular weight
- 76.05 g/mol
- Signal word
- Danger
Hazard classification
- GHS05 — Corrosive
- GHS07 — Exclamation mark — irritant
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation.
Section 1 — Identification
1.1 Product identifier
Product identifier: Glycolic Acid
Chemical name (IUPAC): 2-hydroxyacetic acid
CAS number: 79-14-1
PubChem CID reference: 757
Synonyms: glycolic acid; 2-Hydroxyacetic acid; hydroxyacetic acid; Hydroxyethanoic acid; Glycollic acid; glycolate; alpha-Hydroxyacetic acid; Kyselina glykolova; 2-Hydroxyethanoic acid; GLYCOLLATE
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]
Classification: Acute Toxicity, Category 4 — Inhalation (Acute Tox. 4 (Inhalation)) [H332]
Classification: Skin Corrosion, Category 1B (Skin Corr. 1B) [H314]
Classification: Serious Eye Damage, Category 1 (Eye Dam. 1)
Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H335]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS05 (Corrosion), GHS07 (Exclamation)
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H314: Causes severe skin burns and eye damage.
Hazard statement: H332: Harmful if inhaled.
Hazard statement: H335: May cause respiratory irritation.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.
Precautionary statement: P271: Use only outdoors or in a well-ventilated area.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P270: Do not eat, drink or smoke when using this product.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Precautionary statement: P310: Immediately call a POISON CENTER or doctor/physician.
Precautionary statement: P363: Wash contaminated clothing before reuse.
Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: Colorless, translucent solid
Odor: Odorless
Boiling point: Decomposes at 100°C (no boiling point at atmospheric pressure)
Melting point: 79.5°C (175°F)
Flash point: >300°C (>572°F) (decomposition)
Density: 1.49 at 25 °C/4 °C
Vapor pressure: 0.093 Pa (0.00093 hPa) at 25°C
Water solubility: Very good
Log Pow (log Kow): -1.11 (measured)
Vapor density: 2.6 (air = 1)
pH: pH = 2.5 (0.5%); 2.33 (1.0%); 2.16 (2.0%); 1.91 (5.0%); 1.73 (10.0%)
Not stated in the sourced records: Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity.
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 832
- View the record
- Boiling point — Hazardous Substances Data Bank (HSDB)
- Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 94th Edition. CRC Press LLC, Boca Raton, FL: 2013-2014, p. 3-284
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- Same reference as boiling point above.
- View the record
- Density — Hazardous Substances Data Bank (HSDB)
- Gerhartz, W. (exec ed.). Ullmann's Encyclopedia of Industrial Chemistry. 5th ed.Vol A1: Deerfield Beach, FL: VCH Publishers, 1985 to Present, p. VA13: 509 (1989)
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 4
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Glycolic acid, and where each one comes from
26 measured values for 9 properties, read from 3 public databases. On 4 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
3 records, 100 to 169 °C
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 169 °C at 748.561 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 100 °C at 760 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Melting point
7 records, 63 to 80 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- 78-80 °C (alpha-modification); 63 °C (beta-modification, metastable)
- Hazardous Substances Data Bank (HSDB)
- 79.5 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 63 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 77.5 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
Flash point
1 record
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
Vapour pressure
6 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 2.0X10-2 mm Hg at 25 °C (extrapolated)
- Hazardous Substances Data Bank (HSDB)
- 8.1 [mm Hg] @80 °C
- PAC Chemical Database, U.S. Department of Energy
- 0.0030752542 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.0199986 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.02 mmHg at 25 °C
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 0.02 mmHg
- EPA CompTox Chemicals Dashboard (ChemPROP)
Density
2 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 1.49 at 25 °C/4 °C
- Hazardous Substances Data Bank (HSDB)
Solubility
4 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Soluble in ethanol, ethyl ether
- Hazardous Substances Data Bank (HSDB)
- Soluble in methanol, acetone, acetic acid
- Hazardous Substances Data Bank (HSDB)
- 3.94472 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
- 3.94457 mol/L
- EPA CompTox Chemicals Dashboard (ChemPROP)
Partition coefficient (log Kow)
1 record
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = -1.11
- Hazardous Substances Data Bank (HSDB)
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- pH = 2.5 (0.5%); 2.33 (1.0%); 2.16 (2.0%); 1.91 (5.0%); 1.73 (10.0%)
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
These are the public records read for Glycolic acid, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Glycolic acid
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.