Safety data sheet for Eugenol

CAS 97-53-0

This is the free preview of a draft SDS for Eugenol — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Clove fragrance, CLP-listed allergen.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
97-53-0
Molecular formula
C10H12O2
Molecular weight
164.20 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Eugenol

Chemical name (IUPAC): 2-methoxy-4-prop-2-enylphenol

CAS number: 97-53-0

PubChem CID reference: 3314

Synonyms: eugenol; 4-Allyl-2-methoxyphenol; 4-Allylguaiacol; Eugenic acid; Allylguaiacol; Caryophyllic acid; p-Eugenol; 2-Methoxy-4-prop-2-enylphenol; p-Allylguaiacol; Engenol

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.

Classification: Skin Sensitisation, Category 1 (Skin Sens. 1) [H317]

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H317: May cause an allergic skin reaction.

Hazard statement: H319: Causes serious eye irritation.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.

Precautionary statement: P272: Contaminated work clothing should not be allowed out of the workplace.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.

Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.

Precautionary statement: P333+P313: IF SKIN irritation or rash occurs: Get medical advice/attention.

Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Colorless or pale yellow liquid

Odor: Odor of cloves

Boiling point: 253°C (487°F) at 1013 hPa

Melting point: -9.1°C (16°F)

Flash point: 100°C (212°F) closed cup

Density: 1.0652 g/cm³ at 20°C

Vapor pressure: 1.3 Pa at 20°C

Water solubility: 2460 mg/L at 25 °C

Log Pow (log Kow): 2.49 (measured)

Vapor density: 5.7 (air = 1)

Viscosity: 7.82 cP at 20°C

Not stated in the sourced records: Lower explosive limit, Upper explosive limit, Auto-ignition temperature, pH.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 2006, p. 665
View the record
Boiling point — EPA CompTox Chemicals Dashboard (ChemPROP)
OChem_2024_04_03, exp_prop_BOILING_POINT_v2.0
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as odor above.
View the record
Flash point — Hazardous Substances Data Bank (HSDB)
National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-76
View the record
Density — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.) CRC Handbook of Chemistry and Physics. 91st ed. Boca Raton, FL: CRC Press Inc., 2010-2011, p. 3-12
View the record
Vapor pressure — EPA CompTox Chemicals Dashboard (ChemPROP)
PubChem_2024_11_27, exp_prop_VAPOR_PRESSURE_v2.0
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Yalkowsky, S.H., He, Yan, Jain, P. Handbook of Aqueous Solubility Data Second Edition. CRC Press, Boca Raton, FL 2010, p. 687
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Dias NC et al; Analyst 128(5): 427-433 (2003)
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Eugenol, and where each one comes from

44 measured values for 9 properties, read from 2 public databases. On 4 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

4 records, 233 to 254 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

7 records, -21 to 15 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

15 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Flash point

5 records, 100 to 124 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

>212 °F (>100 °C) (closed cup)
Hazardous Substances Data Bank (HSDB)
100 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Vapour pressure

9 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

0.01 mmHg at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.0221 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.01 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Density

1 record

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

14 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

In water, 2460 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)
0.0149814 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

7.817 centipoise at 20 °C
Hazardous Substances Data Bank (HSDB)

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Eugenol, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Eugenol

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.