Safety data sheet for Dimethyl sulfoxide

CAS 67-68-5

This is the free preview of a draft SDS for Dimethyl sulfoxide — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Laboratory solvent, formulation carrier.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
67-68-5
Molecular formula
C2H6OS
Molecular weight
78.14 g/mol
Signal word
Warning

Hazard classification

  • H227: Combustible liquid.

Section 1 — Identification

1.1 Product identifier

Product identifier: Dimethyl Sulfoxide

Chemical name (IUPAC): methylsulfinylmethane

CAS number: 67-68-5

PubChem CID reference: 679

Synonyms: dimethyl sulfoxide; DMSO; Methylsulfinylmethane; Methyl sulfoxide; Dimethyl sulphoxide; Dimethylsulfoxide; sulfinylbismethane; Demasorb; Domoso; Demsodrox

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes this sheet resolves: Flam. Liq. 4.

Classification: Flammable Liquid, Category 4 (Flam. Liq. 4) [H227]

2.2 Label elements

Signal word: Warning

GHS pictograms: None

Hazard statement: H227: Combustible liquid.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Precautionary statement: P370+P378: In case of fire: Use appropriate extinguishing media.

Precautionary statement: P403: Store in a well-ventilated place.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Colorless liquid

Odor: Slightly sulfurous odor

Boiling point: 190°C (374°F) at 1013 hPa

Melting point: 18.4°C (65°F)

Flash point: 87°C (189°F) closed cup

Density: 1.100 at 20 °C/4 °C

Vapor pressure: 0.6 hPa at 20°C

Water solubility: Miscible

Log Pow (log Kow): -1.35 (measured)

Vapor density: 2.71 (air = 1)

Auto-ignition temperature: 215°C (419°F)

Viscosity: 2.47 cP at 20°C

Not stated in the sourced records: Lower explosive limit, Upper explosive limit, pH.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Lefaux, R. Practical Toxicology of Plastics. Cleveland: CRC Press Inc., 1968, p. 120
View the record
Boiling point — EPA CompTox Chemicals Dashboard (ChemPROP)
PubChem_2024_11_27, exp_prop_BOILING_POINT_v2.0
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 593
View the record
Flash point — EPA CompTox Chemicals Dashboard (ChemPROP)
Echemportalapi, exp_prop_FLASH_POINT_v2.0
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as melting point above.
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Dorigan J et al; Preliminary scoring of selected organic air pollutants. Appendix II-Chemistry, production, and toxicity of chemicals D through E. Research Triangle Park, NC: US EPA, USEPA-450/3-77-008C. pp.327 (1976)
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 5
View the record
Vapor density — Hazardous Substances Data Bank (HSDB)
Verschueren, K. Handbook of Environmental Data on Organic Chemicals. Volumes 1-2. 4th ed. John Wiley & Sons. New York, NY. 2001, p. 541
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-52
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Same reference as melting point above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Dimethyl sulfoxide, and where each one comes from

37 measured values for 11 properties, read from 3 public databases. On 5 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

4 records, 189 to 190 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

189 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
189.5 °C at 760 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Melting point

4 records, 18 to 19 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

18.5 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Flash point

4 records, 87 to 95 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

95 °C (203 °F) (Open cup)
Hazardous Substances Data Bank (HSDB)
95 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Vapour pressure

10 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

0.6 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.42 mmHg at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.445536828 mmHg at 20 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.61 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Vapour density

1 record

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

2 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

7 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Soluble in ethanol, acetone, ether, carbon tetrachloride, ethyl acetate
Hazardous Substances Data Bank (HSDB)
Soluble in chloroform and benzene
Hazardous Substances Data Bank (HSDB)
12.7992 mol/L
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Distinctive garlic or oyster-like odor
Hazardous Substances Data Bank (HSDB)

These are the public records read for Dimethyl sulfoxide, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Dimethyl sulfoxide

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.