Safety data sheet for Copper sulfate
CAS 7758-98-7
This is the free preview of a draft SDS for Copper sulfate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Root killer, fungicide, laboratory reagent.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 7758-98-7
- Molecular formula
- CuO4S
- Molecular weight
- 159.61 g/mol
- Signal word
- Warning
Hazard classification
- GHS07 — Exclamation mark — irritant
- GHS09 — Hazardous to the environment
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
Section 1 — Identification
1.1 Product identifier
Product identifier: Copper Sulfate
Chemical name (IUPAC): copper sulfate
CAS number: 7758-98-7
PubChem CID reference: 24462
Synonyms: Copper sulfate; Copper(II) sulfate; CUPRIC SULFATE; Cupric sulfate anhydrous; Copper sulphate; Copper(2+) sulfate; Copper monosulfate; Trinagle; Delcup; Hylinec
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]
Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]
Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]
Classification: Hazardous to the Aquatic Environment, Acute Hazard, Category 1 (Aquatic Acute 1) [H400]
Classification: Hazardous to the Aquatic Environment, Long-Term Hazard, Category 1 (Aquatic Chronic 1) [H410]
2.2 Label elements
Signal word: Warning
GHS pictograms: GHS07 (Exclamation), GHS09 (Environmental Hazard)
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H315: Causes skin irritation.
Hazard statement: H319: Causes serious eye irritation.
Hazard statement: H400: Very toxic to aquatic life.
Hazard statement: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P273: Avoid release to the environment.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P270: Do not eat, drink or smoke when using this product.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.
Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.
Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Precautionary statement: P332+P313: IF SKIN irritation occurs: Get medical advice/attention.
Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.
Precautionary statement: P391: Collect spillage.
Precautionary statement: P330: Rinse mouth.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: White hygroscopic crystals
Odor: Odourless
Melting point: 590°C (1094°F)
Density: 3.6 @25 °C
Water solubility: 243 g/L at 0 °C
Decomposition temperature: 650 °C (decomp to cupric oxide)
Not stated in the sourced records: Boiling point, Flash point, Vapor pressure, Log Pow (log Kow), Vapor density, Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity, pH.
Where each value came from
- Melting point — Hazardous Substances Data Bank (HSDB)
- Lide, D.R. (ed.). CRC Handbook of Chemistry and Physics. 79th ed. Boca Raton, FL: CRC Press Inc., 1998-1999, p. 4-56
- View the record
- Density — PAC Chemical Database, U.S. Department of Energy
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Ashford, R.D. Ashford's Dictionary of Industrial Chemicals. London, England: Wavelength Publications Ltd., 1994, p. 237
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- ACGIH TLV: Copper, compounds (as Cu), category entry
- Hazardous Substances Data Bank (HSDB)
- NIOSH Pocket Guide: Copper compounds (as Cu, dusts and mists), category entry
- OSHA Table Z-1: Copper dusts and mists (as Cu), category entry
- PAC Chemical Database, U.S. Department of Energy
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
- Section 8 limits applied by compound category: copper compounds (as Cu)
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Copper sulfate, and where each one comes from
10 measured values for 6 properties, read from 2 public databases. On 1 property the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
1 record
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 650 °C (decomp to cupric oxide)
- Hazardous Substances Data Bank (HSDB)
Melting point
1 record
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- 590 °C decomp
- Hazardous Substances Data Bank (HSDB)
Density
2 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
Solubility
3 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- In water, 243 g/l @ 0 °C
- Hazardous Substances Data Bank (HSDB)
- 75.4 g/100 cc water @ 100 °C
- Hazardous Substances Data Bank (HSDB)
- 1.04 g/100 cc methanol @ 18 °C
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Pleasant odor
- Hazardous Substances Data Bank (HSDB)
Decomposition temperature
2 records, each a different case
The temperature at which the substance breaks down, often into products more hazardous than itself.
- 650 °C (decomp to cupric oxide)
- Hazardous Substances Data Bank (HSDB)
- SLIGHT DECOMP ABOVE 200 °C
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Copper sulfate, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Copper sulfate
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.