Safety data sheet for Cinnamaldehyde

CAS 104-55-2

This is the free preview of a draft SDS for Cinnamaldehyde — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Cinnamon fragrance, CLP-listed allergen.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
104-55-2
Molecular formula
C9H8O
Molecular weight
132.16 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • H312: Harmful in contact with skin.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H412: Harmful to aquatic life with long lasting effects.

Section 1 — Identification

1.1 Product identifier

Product identifier: Cinnamaldehyde

Chemical name (IUPAC): (E)-3-phenylprop-2-enal

CAS number: 104-55-2

PubChem CID reference: 637511

Synonyms: cinnamaldehyde; Zimtaldehyde; Cinnamal; 3-Phenylacrylaldehyde; 2-Propenal, 3-phenyl-; Phenylacrolein; 3-Phenylpropenal; 3-Phenyl-2-propenal; (E)-3-phenylprop-2-enal; Cassia aldehyde

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.

Classification: Acute Toxicity, Category 4 — Dermal (Acute Tox. 4 (Dermal)) [H312]

Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]

Classification: Skin Sensitisation, Category 1A (Skin Sens. 1A) [H317]

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]

Classification: Hazardous to the Aquatic Environment, Long-Term Hazard, Category 3 (Aquatic Chronic 3) [H412]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H312: Harmful in contact with skin.

Hazard statement: H315: Causes skin irritation.

Hazard statement: H317: May cause an allergic skin reaction.

Hazard statement: H319: Causes serious eye irritation.

Hazard statement: H412: Harmful to aquatic life with long lasting effects.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.

Precautionary statement: P273: Avoid release to the environment.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.

Precautionary statement: P272: Contaminated work clothing should not be allowed out of the workplace.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.

Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.

Precautionary statement: P332+P313: IF SKIN irritation occurs: Get medical advice/attention.

Precautionary statement: P333+P313: IF SKIN irritation or rash occurs: Get medical advice/attention.

Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.

Precautionary statement: P312: Call a POISON CENTER/doctor if you feel unwell.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Yellowish oily liquid

Odor: Pungent, spicy note

Boiling point: 248°C at 1013 hPa

Melting point: -7.5°C (19°F)

Flash point: 120°C (248°F) closed cup

Density: 1.05 g/cm³ at 25°C

Vapor pressure: 3.9 Pa at 25°C

Water solubility: 1,420 mg/L at 25 °C

Log Pow (log Kow): 1.90 (measured)

Vapor density: 4.6 (air = 1)

Not stated in the sourced records: Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity, pH.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Fenaroli's Handbook of Flavor Ingredients. Volume 2. Edited, translated, and revised by T.E. Furia and N. Bellanca. 2nd ed. Cleveland: The Chemical Rubber Co., 1975, p. 91
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Lide, DR (ed.). CRC Handbook of Chemistry and Physics. 71st ed. Boca Raton, FL: CRC Press Inc., 1990-1991, p. 3-180
View the record
Flash point — Hazardous Substances Data Bank (HSDB)
European Chemicals Bureau; IUCLID Dataset, Cinnamaldehyde (104-55-2) (2000 CD-ROM edition)
View the record
Vapor pressure — Hazardous Substances Data Bank (HSDB)
Perry RH, Green D; Perry's Chemical Handbook. Physical and Chemical data. NY, NY: McGraw-Hill 6th ed (1984)
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
PMID:7241352
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 53
View the record
Vapor density — Hazardous Substances Data Bank (HSDB)
Patty, F. (ed.). Industrial Hygiene and Toxicology: Volume II: Toxicology. 2nd ed. New York: Interscience Publishers, 1963, p. 1983
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Cinnamaldehyde, and where each one comes from

14 measured values for 9 properties, read from 1 public database. Every record agrees. Follow any linked record to read the value at its source.

Boiling point

1 record

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

253 °C @ 760 MM HG (SLIGHT DECOMP)
Hazardous Substances Data Bank (HSDB)

Melting point

1 record

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Flash point

1 record

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

Vapour pressure

1 record

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

2.89X10-2 mm Hg at 25 °C
Hazardous Substances Data Bank (HSDB)

Vapour density

1 record

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

VAPOR DENSITY: 4.6 (AIR= 1)
Hazardous Substances Data Bank (HSDB)

Density

1 record

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

1.048-1.052 at 25 °C/25 °C
Hazardous Substances Data Bank (HSDB)

Solubility

5 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Dissolves in about 700 parts water, in about 7 volumes of 60% alcohol
Hazardous Substances Data Bank (HSDB)
SOL IN ETHER, CHLOROFORM; INSOL IN PETROLEUM ETHER
Hazardous Substances Data Bank (HSDB)
Miscible with alcohol, ether, chloroform, oils
Hazardous Substances Data Bank (HSDB)
SOLUBILITY: 1:5 IN 60%, 1:25 IN 50%, 1:2.5 IN 70% ALC
Hazardous Substances Data Bank (HSDB)
In water, 1.42X10+3 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Cinnamaldehyde, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Cinnamaldehyde

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.