Safety data sheet for Cetyl alcohol

CAS 36653-82-4

This is the free preview of a draft SDS for Cetyl alcohol — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Cosmetic emollient, cream and lotion base.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
36653-82-4
Molecular formula
C16H34O
Molecular weight
242.44 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Health hazard — irritant
  • H319: Causes serious eye irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Cetyl Alcohol

Chemical name (IUPAC): hexadecan-1-ol

CAS number: 36653-82-4

PubChem CID reference: 2682

Synonyms: 1-Hexadecanol; cetyl alcohol; Hexadecan-1-ol; Palmityl alcohol; Cetanol; Hexadecyl alcohol; Cetaffine; N-Hexadecanol; n-Cetyl alcohol; Cetylol

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes this sheet resolves: Eye Irrit. 2.

Classification: Eye Irritation, Category 2 (Eye Irrit. 2) [H319]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H319: Causes serious eye irritation.

Precautionary statement: P264+P265: Wash hands thoroughly after handling. Do not touch eyes.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P337+P317: If eye irritation persists: Get medical help.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Solid

Appearance: FLAKES FROM ETHYL ACETATE

Odor: Faint odor

Boiling point: 334°C (633°F) at 1013 hPa

Melting point: 49.3°C (121°F)

Flash point: 175°C (347°F)

Density: 0.8187 at 50 °C/4 °C

Vapor pressure: 8 hPa at 25°C

Water solubility: 1.34e-05 mg/mL at 25 °C

Log Pow (log Kow): 7.0

Vapor density: 8.36 (air = 1)

Viscosity: 53 mPa-s (=cP) at 75 °C

Not found in the public records searched: lower explosive limit, upper explosive limit, auto-ignition temperature and pH. Enter these from your supplier's safety data sheet or your own test report before the draft is issued.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Lewis, R.J. Sr.; Hawley's Condensed Chemical Dictionary 14th Edition. John Wiley & Sons, Inc. New York, NY 2001, p. 234
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
Lide, D.R., G.W.A. Milne (eds.). Handbook of Data on Organic Compounds. Volume I. 3rd ed. CRC Press, Inc. Boca Raton, FL. 1994, p. V3: 3026
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Yalkowsky, S.H., He, Yan., Handbook of Aqueous Solubility Data: An Extensive Compilation of Aqueous Solubility Data for Organic Compounds Extracted from the AQUASOL Database. CRC Press LLC, Boca Raton, FL. 2003, p. 1063
View the record
Vapor density — Hazardous Substances Data Bank (HSDB)
Patty, F. (ed.). Industrial Hygiene and Toxicology: Volume II: Toxicology. 2nd ed. New York: Interscience Publishers, 1963, p. 1470
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Kirk-Othmer Encyclopedia of Chemical Technology. 4th ed. Volumes 1: New York, NY. John Wiley and Sons, 1991-Present, p. V1: 868 (1991)
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Cetyl alcohol, and where each one comes from

13 measured values for 8 properties, read from 2 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.

Boiling point

1 record

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

2 records, 49 to 50 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Vapour pressure

1 record

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

Vapour density

1 record

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

2 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

3 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Slightly soluble in alcohol; soluble in acetone; very soluble in ether, benzene, chloroform
Hazardous Substances Data Bank (HSDB)
Soluble in alcohol, chloroform, ether
Hazardous Substances Data Bank (HSDB)
In water, 4.1X10-2 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Cetyl alcohol, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Cetyl alcohol

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or a novel compound stops before checkout and routes to the free mixture classifier or R&D SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.