Safety data sheet for Caffeine

CAS 58-08-2

This is the free preview of a draft SDS for Caffeine — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Energy products, cosmetics, supplements.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
58-08-2
Molecular formula
C8H10N4O2
Molecular weight
194.19 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • H302: Harmful if swallowed.

Section 1 — Identification

1.1 Product identifier

Product identifier: Caffeine

Chemical name (IUPAC): 1,3,7-trimethylpurine-2,6-dione

CAS number: 58-08-2

PubChem CID reference: 2519

Synonyms: caffeine; Guaranine; 1,3,7-Trimethylxanthine; Methyltheobromine; Theine; Thein; Cafeina; Caffein; Cafipel; Koffein

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows carry EU CLP (ECHA) classifications; no US-specific classification source resolved for this substance.

Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation)

Hazard statement: H302: Harmful if swallowed.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P270: Do not eat, drink or smoke when using this product.

Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.

Precautionary statement: P330: Rinse mouth.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Solid

Appearance: White, prismatic crystals

Odor: Odorless

Melting point: 236.2°C (457°F)

Flash point: 205.9°C (403°F)

Density: 1.23 at 18 °C/4 °C

Vapor pressure: 1.2 × 10⁻⁴ Pa at 25°C

Water solubility: 21,600 mg/L at 25 °C

Log Pow (log Kow): -0.07 (measured)

pH: pH = 6.9 (1% solution)

Not stated in the sourced records: Boiling point, Vapor density, Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 289
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 94th Edition. CRC Press LLC, Boca Raton, FL: 2013-2014, p. 3-90
View the record
Flash point — EPA CompTox Chemicals Dashboard (ChemPROP)
OChem_2024_04_03, exp_prop_FLASH_POINT_v2.0
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as odor above.
View the record
Vapor pressure — Hazardous Substances Data Bank (HSDB)
Emel'yanenko VN, Verevkin SP; J Chem Thermodynamics 40: 1661-1665 (2008)
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Yalkowsky, S.H., He, Yan, Jain, P. Handbook of Aqueous Solubility Data Second Edition. CRC Press, Boca Raton, FL 2010, p. 506
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 44
View the record
pH — Hazardous Substances Data Bank (HSDB)
Same reference as odor above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • ECHA CHEM C&L backfill 2026-10-22
  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Caffeine, and where each one comes from

43 measured values for 9 properties, read from 2 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

1 record

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

5 records, 235 to 238 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Flash point

1 record

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

Vapour pressure

3 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

9.0X10-7 mm Hg at 25 °C /Extrapolated/
Hazardous Substances Data Bank (HSDB)
9.000000000000007e-7 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
1e-8 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Density

1 record

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

29 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Solubility in water is increased by alkali benzoates, cinnamates, citrates or salicylates
Hazardous Substances Data Bank (HSDB)
In water, 2.16X10+4 mg/L at 25 °C
Hazardous Substances Data Bank (HSDB)
Freely soluble in pyrrole; slightly soluble in petroleum ether; freely soluble in tetrahydrofuran containing about 4% water
Hazardous Substances Data Bank (HSDB)
0.13489628825916536 mol/L at 30 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.11439556719673001 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.11439556519254998 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.09616122783836599 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.11192326635366855 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.12302687708123815 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.15448469056716482 mol/L at 22.8 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.11194542794722086 mol/L
EPA CompTox Chemicals Dashboard (ChemPROP)
0.11122897720835868 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.11174392617691585 mol/L
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

pH

1 record

Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Caffeine, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Caffeine

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.