Safety data sheet for Butylene glycol

CAS 107-88-0

This is the free preview of a draft SDS for Butylene glycol — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Cosmetic humectant and solvent.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
107-88-0
Molecular formula
C4H10O2
Molecular weight
90.12 g/mol
Signal word
None required — not classified

Section 1 — Identification

1.1 Product identifier

Product identifier: 1,3-Butanediol

Chemical name (IUPAC): butane-1,3-diol

CAS number: 107-88-0

PubChem CID reference: 7896

Synonyms: 1,3-BUTANEDIOL; Butane-1,3-diol; 1,3-Butylene glycol; Butylene glycol; 1,3-Dihydroxybutane; beta-Butylene glycol; Methyltrimethylene glycol; 1-Methyl-1,3-propanediol; 1,3-Butandiol; (RS)-1,3-Butandiol

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The not-classified determination follows a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.

Classification: Not classified. This substance meets no hazard class criteria of OSHA 29 CFR 1910.1200 Appendix A on the data reviewed.

2.2 Label elements

Signal word: None required

GHS pictograms: None

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Viscous liquid

Odor: Practically odorless

Boiling point: 207.5°C (406°F) at 1013 hPa

Melting point: <-50°C (<-58°F)

Flash point: 121°C (250°F)

Density: 1 g/cm³ at 20°C

Vapor pressure: 2.7 Pa at 20°C

Water solubility: Miscible

Log Pow (log Kow): -0.290

Vapor density: 3.2 (air = 1)

Auto-ignition temperature: 393°C (739°F)

Viscosity: 96 cSt at 25 °C

Not stated in the sourced records: Lower explosive limit, Upper explosive limit, pH.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Lewis, R.J. Sr.; Hawley's Condensed Chemical Dictionary 15th Edition. John Wiley & Sons, Inc. New York, NY 2007, p. 199
View the record
Boiling point — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 276
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record
Flash point — Hazardous Substances Data Bank (HSDB)
Same reference as odor above.
View the record
Density — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-76
View the record
Vapor pressure — Hazardous Substances Data Bank (HSDB)
Daubert, T.E., R.P. Danner. Physical and Thermodynamic Properties of Pure Chemicals Data Compilation. Washington, D.C.: Taylor and Francis, 1989
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
Riddick, J.A., W.B. Bunger, Sakano T.K. Techniques of Chemistry 4th ed., Volume II. Organic Solvents. New York, NY: John Wiley and Sons., 1985, p. 268
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
Same reference as odor above.
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Same reference as boiling point above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Butylene glycol, and where each one comes from

14 measured values for 9 properties, read from 2 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

2 records agree

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

1 record

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Flash point

1 record

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

250 °F (121 °C) (Cleveland Open Cup)
Hazardous Substances Data Bank (HSDB)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Vapour pressure

2 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

Density

2 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

2 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Slightly soluble in ether
Hazardous Substances Data Bank (HSDB)

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Butylene glycol, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Butylene glycol

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.