Safety data sheet for Benzyl benzoate

CAS 120-51-4

This is the free preview of a draft SDS for Benzyl benzoate — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Fragrance fixative (label allergen), lice and scabies products.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
120-51-4
Molecular formula
C14H12O2
Molecular weight
212.24 g/mol
Signal word
Warning

Hazard classification

  • GHS07 — Exclamation mark — irritant
  • GHS09 — Hazardous to the environment
  • H302: Harmful if swallowed.
  • H411: Toxic to aquatic life with long lasting effects.

Section 1 — Identification

1.1 Product identifier

Product identifier: Benzyl Benzoate

Chemical name (IUPAC): benzyl benzoate

CAS number: 120-51-4

PubChem CID reference: 2345

Synonyms: BENZYL BENZOATE; Ascabiol; Benylate; Benzoic acid, phenylmethyl ester; Phenylmethyl benzoate; Scobenol; Benzoic acid, benzyl ester; Novoscabin; Scabiozon; Ascabin

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows carry EU CLP (ECHA) classifications; no US-specific classification source resolved for this substance.

Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]

Classification: Hazardous to the Aquatic Environment, Long-Term Hazard, Category 2 (Aquatic Chronic 2) [H411]

2.2 Label elements

Signal word: Warning

GHS pictograms: GHS07 (Exclamation), GHS09 (Environmental Hazard)

Hazard statement: H302: Harmful if swallowed.

Hazard statement: H411: Toxic to aquatic life with long lasting effects.

Precautionary statement: P273: Avoid release to the environment.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P270: Do not eat, drink or smoke when using this product.

Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.

Precautionary statement: P391: Collect spillage.

Precautionary statement: P330: Rinse mouth.

Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Leaflets or oily liquid

Odor: Light, balsamic odor reminiscent of almond

Boiling point: 324°C (615°F) at 1013 hPa

Melting point: 19°C (66°F)

Flash point: 158°C (316°F) closed cup

Density: 1.1121 g/cm³ at 25°C

Vapor pressure: 0.03 Pa at 25°C

Water solubility: Insoluble in water

Log Pow (log Kow): 3.97 (measured)

Vapor density: 7.31 (air = 1)

Auto-ignition temperature: 480°C (896°F)

Viscosity: 8.29 cP at 25°C

pH: Solution in alcohol practically neutral to moistened litmus paper

Not stated in the sourced records: Lower explosive limit, Upper explosive limit.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Burdock, G.A. (ed.). Fenaroli's Handbook of Flavor Ingredients. 6th ed.Boca Raton, FL 2010, p. 145
View the record
Boiling point — PAC Chemical Database, U.S. Department of Energy
View the record
Melting point — Hazardous Substances Data Bank (HSDB)
Haynes, W.M. (ed.). CRC Handbook of Chemistry and Physics. 95th Edition. CRC Press LLC, Boca Raton, FL: 2014-2015, p. 3-44
View the record
Flash point — EPA CompTox Chemicals Dashboard (ChemPROP)
PubChem_2024_11_27, exp_prop_FLASH_POINT_v2.0
View the record
Density — Hazardous Substances Data Bank (HSDB)
Same reference as melting point above.
View the record
Vapor pressure — Hazardous Substances Data Bank (HSDB)
Daubert, T.E., R.P. Danner. Physical and Thermodynamic Properties of Pure Chemicals Data Compilation. Washington, D.C.: Taylor and Francis, 1989
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Cambridge, UK: Royal Society of Chemistry, 2013, p. 199
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 120
View the record
Vapor density — Hazardous Substances Data Bank (HSDB)
Lide, D.R., G.W.A. Milne (eds.). Handbook of Data on Organic Compounds. Volume I. 3rd ed. CRC Press, Inc. Boca Raton, FL. 1994, p. V2: 474
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-18
View the record
Viscosity — Hazardous Substances Data Bank (HSDB)
Riddick, J.A., W.B. Bunger, Sakano T.K. Techniques of Chemistry 4th ed., Volume II. Organic Solvents. New York, NY: John Wiley and Sons., 1985, p. 430
View the record
pH — Hazardous Substances Data Bank (HSDB)
Osol, A. and J.E. Hoover, et al. (eds.). Remington's Pharmaceutical Sciences. 15th ed. Easton, Pennsylvania: Mack Publishing Co., 1975, p. 1179
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • ECHA CHEM C&L backfill 2026-10-13
  • EPA CompTox Chemicals Dashboard (ChemPROP)
  • Hazardous Substances Data Bank (HSDB)
  • PAC Chemical Database, U.S. Department of Energy
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Benzyl benzoate, and where each one comes from

42 measured values for 11 properties, read from 3 public databases. On 5 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Boiling point

6 records, 321 to 324 °C

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

323.5 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
321.3 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Melting point

5 records, 18 to 21 °C

Fixes the physical state at handling temperature, which the label and the transport class depend on.

21 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
19 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Flash point

6 records, 145 to 158 °C

The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.

158 °C (316 °F) - closed cup
Hazardous Substances Data Bank (HSDB)
298 °F (148 °C) - closed cup
Hazardous Substances Data Bank (HSDB)
158 °C
EPA CompTox Chemicals Dashboard (ChemPROP)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Vapour pressure

8 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

0.000224 mmHg at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.000224 mmHg
EPA CompTox Chemicals Dashboard (ChemPROP)

Vapour density

1 record

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

2 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

9 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Insoluble in glycerol; miscible with alcohol, chloroform, ether, oils
Hazardous Substances Data Bank (HSDB)
Soluble in ethanol, ethyl ether, acetone, benzene, methanol, chloroform
Hazardous Substances Data Bank (HSDB)
0.0000726106 mol/L at 25 °C
EPA CompTox Chemicals Dashboard (ChemPROP)
0.0000932871 mol/L
EPA CompTox Chemicals Dashboard (ChemPROP)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

Odour

2 records, each a different case

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

Light, balsamic odor reminiscent of almond
Hazardous Substances Data Bank (HSDB)
Faint, pleasant, aromatic odor
Hazardous Substances Data Bank (HSDB)

These are the public records read for Benzyl benzoate, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Benzyl benzoate

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.