Safety data sheet for Ascorbic acid

CAS 50-81-7

This is the free preview of a draft SDS for Ascorbic acid — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Vitamin C serums, food antioxidant, supplements.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
50-81-7
Molecular formula
C6H8O6
Molecular weight
176.12 g/mol
Signal word
None required — not classified

Hazard classification

  • Not Classified

Section 1 — Identification

1.1 Product identifier

Product identifier: L-Ascorbic Acid

Chemical name (IUPAC): (2R)-2-[(1S)-1,2-dihydroxyethyl]-3,4-dihydroxy-2H-furan-5-one

CAS number: 50-81-7

PubChem CID reference: 54670067

Synonyms: l-ascorbic acid; ascorbic acid; vitamin C; L(+)-Ascorbic acid; Ascoltin; Ascorbicap; Cevitamic acid; Allercorb; Ascorbajen; Ascorin

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification: Not classified as hazardous according to the sources named below.

2.2 Label elements

Signal word: Not available

GHS pictograms: None

Hazard statement: Not classified

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Solid

Appearance: Crystals (usually plates, sometimes needles, monoclinic system)

Odor: Odorless

Melting point: 190°C (374°F) (decomposes)

Density: 1.65 g/cm³ at 25°C

Water solubility: 80% at 100 °C, 40% at 45 °C

Log Pow (log Kow): -1.85 (measured)

Auto-ignition temperature: 380°C (716°F)

pH: pH = 3 (5 mg/mL); pH = 2 (50 mg/mL)

Not stated in the sourced records: Boiling point, Flash point, Vapor pressure, Vapor density, Lower explosive limit, Upper explosive limit, Viscosity.

Where each value came from

Odor — Hazardous Substances Data Bank (HSDB)
Chase et al; Remington's Pharmaceutical Sciences 14th ed. Mack Publ Co. Easton, PA p. 1036 (1970)
View the record
Density — Hazardous Substances Data Bank (HSDB)
Lide, D.R. CRC Handbook of Chemistry and Physics 88th Edition 2007-2008. CRC Press, Taylor & Francis, Boca Raton, FL 2007, p. 3-28
View the record
Water solubility — Hazardous Substances Data Bank (HSDB)
O'Neil, M.J. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 2006, p. 136
View the record
Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
Avdeef A; Seminar on Ionization and Lipophilicity. Log P values measured by Pion Inc., Brookline, MA (1997)
View the record
Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
Organization for Economic Cooperation and Development; Screening Information Data Set for L-Ascorbic acid CAS 50-81-7
View the record
pH — Hazardous Substances Data Bank (HSDB)
Same reference as water solubility above.
View the record

A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.

Sources

  • Hazardous Substances Data Bank (HSDB)
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Ascorbic acid, and where each one comes from

11 measured values for 7 properties, read from 1 public database. On 1 property the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.

Melting point

2 records differ

Fixes the physical state at handling temperature, which the label and the transport class depend on.

190-192 °C (some decomposition)
Hazardous Substances Data Bank (HSDB)
Melting point = 465.15 deg K, decomposes
Hazardous Substances Data Bank (HSDB)

Auto-ignition temperature

1 record

The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.

Density

1 record

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Solubility

4 records, each a different case

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

Insoluble in ether, chloroform, benzene, petroleum ether, oils, fats, fat solvents
Hazardous Substances Data Bank (HSDB)
1 g dissolves in about 3 ml of water
Hazardous Substances Data Bank (HSDB)
The solubility in g/mL is 0.33 in water, 0.033 in 95 wt% ethanol, 0.02 in absolute ethanol, 0.01 in glycerol USP, 0.05 in propylene glycol
Hazardous Substances Data Bank (HSDB)
Solubility in water: 80% at 100 °C, 40% at 45 °C
Hazardous Substances Data Bank (HSDB)

Partition coefficient (log Kow)

1 record

Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.

pH

1 record

Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.

pH = 3 (5 mg/mL); pH = 2 (50 mg/mL)
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Ascorbic acid, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Ascorbic acid

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or an unlisted compound stops before checkout and routes to the free mixture classifier (a declared formula can be bought there as a $5 EU-format draft) or Custom SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.