Safety data sheet for Ammonium hydroxide
CAS 1336-21-6
This is the free preview of a draft SDS for Ammonium hydroxide — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Cleaning products, laboratory reagent.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 1336-21-6
- Molecular formula
- NH4OH
- Molecular weight
- 35.046 g/mol
- Signal word
- Danger
Hazard classification
- GHS05 — Corrosive
- GHS07 — Exclamation mark — irritant
- GHS09 — Hazardous to the environment
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
Section 1 — Identification
1.1 Product identifier
Product identifier: Ammonium Hydroxide
Chemical name (IUPAC): azanium hydroxide
CAS number: 1336-21-6
PubChem CID reference: 14923
Synonyms: ammonium hydroxide; Ammonia water; Ammonia aqueous; Aquammonia; Ammonia, aqua; Household ammonia; NH4OH; Ammonia, monohydrate; SX 1 (ammonia water); Ammonia water 29%
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Skin Corrosion, Category 1B (Skin Corr. 1B) [H314]
Classification: Serious Eye Damage, Category 1 (Eye Dam. 1)
Classification: Specific Target Organ Toxicity, Single Exposure, Category 3 (STOT SE 3) [H335]
Classification: Hazardous to the Aquatic Environment, Acute Hazard, Category 1 (Aquatic Acute 1) [H400]
Classification: Hazardous to the Aquatic Environment, Long-Term Hazard, Category 1 (Aquatic Chronic 1) [H410]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS05 (Corrosion), GHS07 (Exclamation), GHS09 (Environmental Hazard)
Hazard statement: H314: Causes severe skin burns and eye damage.
Hazard statement: H335: May cause respiratory irritation.
Hazard statement: H400: Very toxic to aquatic life.
Hazard statement: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.
Precautionary statement: P271: Use only outdoors or in a well-ventilated area.
Precautionary statement: P273: Avoid release to the environment.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Precautionary statement: P391: Collect spillage.
Precautionary statement: P310: Immediately call a POISON CENTER or doctor/physician.
Precautionary statement: P363: Wash contaminated clothing before reuse.
Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Liquid
Appearance: Colorless liquid
Odor: Intense, pungent, suffocating odor
Boiling point: 38°C (25% solution)
Melting point: -58°C (25% solution)
Density: 0.9 (relative density, water = 1; 25% solution)
Vapor pressure: 48 kPa at 20°C (25% solution)
Water solubility: Miscible
Vapor density: 0.6 (air = 1)
pH: pH= 11.6 (1.0 N solution); 11.1 (0.1 N solution); 10.6 (0.01 N solution)
Not stated in the sourced records: Flash point, Log Pow (log Kow), Lower explosive limit, Upper explosive limit, Auto-ignition temperature, Viscosity.
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- Budavari, S. (ed.). The Merck Index - An Encyclopedia of Chemicals, Drugs, and Biologicals. Whitehouse Station, NJ: Merck and Co., Inc., 1996, p. 87
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- Hazardous Substances Data Bank (HSDB)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Ammonium hydroxide, and where each one comes from
9 measured values for 7 properties, read from 2 public databases. On 2 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
1 record
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 36 °C @760 [mm Hg]
- PAC Chemical Database, U.S. Department of Energy
Melting point
1 record
Fixes the physical state at handling temperature, which the label and the transport class depend on.
Vapour pressure
2 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 2160 mm Hg @ 25 °C
- Hazardous Substances Data Bank (HSDB)
- 2160 [mm Hg] @25 °C
- PAC Chemical Database, U.S. Department of Energy
Density
2 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- About 0.90 @ 25 °C/25 °C
- Hazardous Substances Data Bank (HSDB)
Solubility
1 record
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Exists only in solution
- Hazardous Substances Data Bank (HSDB)
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- pH= 11.6 (1.0 N solution); 11.1 (0.1 N solution); 10.6 (0.01 N solution)
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Intense, pungent, suffocating odor
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Ammonium hydroxide, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Ammonium hydroxide
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.