Safety data sheet for 2-Butoxyethanol
CAS 111-76-2
This is the free preview of a draft SDS for 2-Butoxyethanol — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Glass and surface cleaners, degreasers, coatings.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 111-76-2
- Molecular formula
- C6H14O2
- Molecular weight
- 118.17 g/mol
- Signal word
- Danger
Hazard classification
- GHS06 — Acute toxicity
- GHS07 — Exclamation mark — irritant
- H227: Combustible liquid.
- H302: Harmful if swallowed.
- H331: Toxic if inhaled.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
Section 1 — Identification
1.1 Product identifier
Product identifier: 2-Butoxyethanol
Chemical name (IUPAC): 2-butoxyethanol
CAS number: 111-76-2
PubChem CID reference: 8133
Synonyms: 2-Butoxyethanol; Butyl glycol; Butoxyethanol; Butyl cellosolve; ETHYLENE GLYCOL MONOBUTYL ETHER; Ethylene glycol butyl ether; n-Butoxyethanol; Butyl oxitol; Dowanol EB; Glycol butyl ether
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes. The classification rows follow a reviewer-checked US profile based on EU CLP data and a current US supplier SDS.
Classification: Flammable Liquid, Category 4 (Flam. Liq. 4) [H227]
Classification: Acute Toxicity, Category 4 — Oral (Acute Tox. 4 (Oral)) [H302]
Classification: Acute Toxicity, Category 3 — Inhalation (Acute Tox. 3 (Inhalation)) [H331]
Classification: Skin Irritation, Category 2 (Skin Irrit. 2) [H315]
Classification: Eye Irritation, Category 2A (Eye Irrit. 2A) [H319]
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS06 (Toxic), GHS07 (Exclamation)
Hazard statement: H227: Combustible liquid.
Hazard statement: H302: Harmful if swallowed.
Hazard statement: H331: Toxic if inhaled.
Hazard statement: H315: Causes skin irritation.
Hazard statement: H319: Causes serious eye irritation.
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection and face protection.
Precautionary statement: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Precautionary statement: P271: Use only outdoors or in a well-ventilated area.
Precautionary statement: P264: Wash hands thoroughly after handling.
Precautionary statement: P270: Do not eat, drink or smoke when using this product.
Precautionary statement: P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
Precautionary statement: P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Precautionary statement: P302+P352: IF ON SKIN: Wash with plenty of water.
Precautionary statement: P370+P378: In case of fire: Use appropriate extinguishing media.
Precautionary statement: P362+P364: Take off contaminated clothing and wash it before reuse.
Precautionary statement: P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
Precautionary statement: P332+P313: IF SKIN irritation occurs: Get medical advice/attention.
Precautionary statement: P337+P313: IF eye irritation persists: Get medical advice/attention.
Precautionary statement: P311: Call a POISON CENTER/doctor.
Precautionary statement: P330: Rinse mouth.
Precautionary statement: P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Liquid
Appearance: Colorless liquid
Odor: Mild, ether-like odor
Boiling point: 168.4°C (335°F) at 1013 hPa
Melting point: -74.8°C (-103°F)
Flash point: 62°C (144°F) closed cup
Density: 0.9015 at 20 °C
Vapor pressure: 0.8 hPa at 20°C
Water solubility: Miscible
Log Pow (log Kow): 0.83 (measured)
Vapor density: 4.07 (air = 1)
Lower explosive limit: 1.1% (v/v in air)
Upper explosive limit: 12.7% (v/v in air)
Auto-ignition temperature: 238°C (460°F)
Viscosity: 3.15 centistokes at 25 °C
Not stated in the sourced records: pH.
Occupational exposure limits for 2-Butoxyethanol
The airborne limits on public record in the United States. These are transcribed from the tables named in each row, not derived. The full draft puts them in Section 8 with the control and PPE guidance.
OSHA PEL — TWA (8 h)
50 ppm (240 mg/m³)
OSHA Annotated PEL Table Z-1
NIOSH REL — TWA (up to 10 h)
5 ppm
OSHA Annotated PEL Table Z-1 (NIOSH REL column)
Where each value came from
- Odor — Hazardous Substances Data Bank (HSDB)
- NIOSH. NIOSH Pocket Guide to Chemical Hazards. Department of Health & Human Services, Centers for Disease Prevention & Control. National Institute for Occupational Safety & Health. DHHS (NIOSH) Publication No. 2010-168 (2010)
- View the record
- Boiling point — Hazardous Substances Data Bank (HSDB)
- Haynes, W.M. (ed.) CRC Handbook of Chemistry and Physics. 91st ed. Boca Raton, FL: CRC Press Inc., 2010-2011, p. 3-76
- View the record
- Melting point — Hazardous Substances Data Bank (HSDB)
- Same reference as boiling point above.
- View the record
- Flash point — Hazardous Substances Data Bank (HSDB)
- National Fire Protection Association; Fire Protection Guide to Hazardous Materials. 14th Edition, Quincy, MA 2010, p. 325-62
- View the record
- Density — Hazardous Substances Data Bank (HSDB)
- Same reference as boiling point above.
- View the record
- Vapor pressure — Hazardous Substances Data Bank (HSDB)
- Verschueren, K. Handbook of Environmental Data on Organic Chemicals. Volumes 1-2. 4th ed. John Wiley & Sons. New York, NY. 2001, p. 387
- View the record
- Water solubility — Hazardous Substances Data Bank (HSDB)
- Riddick, J.A., W.B. Bunger, Sakano T.K. Techniques of Chemistry 4th ed., Volume II. Organic Solvents. New York, NY: John Wiley and Sons., 1985, p. 691
- View the record
- Log Pow (log Kow) — Hazardous Substances Data Bank (HSDB)
- Hansch, C., Leo, A., D. Hoekman. Exploring QSAR - Hydrophobic, Electronic, and Steric Constants. Washington, DC: American Chemical Society., 1995, p. 25
- View the record
- Auto-ignition temperature — Hazardous Substances Data Bank (HSDB)
- Same reference as flash point above.
- View the record
- Viscosity — Hazardous Substances Data Bank (HSDB)
- Dow Chemical Co; The Glycol Ethers Handbook. Midland, MI: The Dow Chemical Co, p. 15 (1990)
- View the record
A value with no row here was assembled from more than one record, so no single record is credited for it. The draft you buy carries this table as an appendix covering all 16 sections.
Sources
- Hazardous Substances Data Bank (HSDB)
- OSHA Annotated PEL Table Z-1
- OSHA Annotated PEL Table Z-1 (NIOSH REL column)
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for 2-Butoxyethanol, and where each one comes from
35 measured values for 12 properties, read from 4 public databases. On 5 properties the records differ. Each reading is shown with its own record. Follow any linked record to read the value at its source.
Boiling point
4 records, 168 to 171 °C
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
- 339 °F
- NIOSH Pocket Guide
- 168.4 °C @760 [mm Hg]
- PAC Chemical Database, U.S. Department of Energy
Melting point
4 records, -77 to -75 °C
Fixes the physical state at handling temperature, which the label and the transport class depend on.
- -107 °F
- NIOSH Pocket Guide
Flash point
3 records agree
The lowest temperature at which the liquid gives off enough vapour to ignite. It decides the GHS flammable liquid category.
- 143 °F (62 °C) (Closed Cup)
- Hazardous Substances Data Bank (HSDB)
- 143 °F
- NIOSH Pocket Guide
Auto-ignition temperature
1 record
The temperature at which the substance ignites with no spark or flame. It sets safe surface and process temperatures.
- 238 °C (460 °F)
- Hazardous Substances Data Bank (HSDB)
Explosive limits
1 record
The vapour concentration range in air that will burn. Below the lower limit and above the upper limit it will not.
- Above 61 °C explosive vapour/air mixtures may be formed
- Hazardous Substances Data Bank (HSDB)
Vapour pressure
6 records differ
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- Vapor pressure = 0.6 mm Hg at 20 °C (0.89 hPa); 3.7 hPa at 40 °C; Conversions: 1 mg/cu m = 0.204 ppm; 1 ppm = 4.90 mg/cu m
- Hazardous Substances Data Bank (HSDB)
- Vapor pressure: -31 °C at 1 Pa; -8 °C at 10 Pa; 20 °C at 100 Pa; 55 °C at 1 kPa; 103.2 °C at 10kPa; 170.2 °C at kPa
- Hazardous Substances Data Bank (HSDB)
- 0.88 mm Hg at 25 °C
- Hazardous Substances Data Bank (HSDB)
- 0.8 mmHg
- NIOSH Pocket Guide
- 0.8 [mm Hg] @25 °C
- PAC Chemical Database, U.S. Department of Energy
Vapour density
2 records differ
Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.
- 4.1 (Air = 1)
- Hazardous Substances Data Bank (HSDB)
Density
4 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 0.9015 at 20 °C
- Hazardous Substances Data Bank (HSDB)
- 0.9012 @ 20°C
- PAC Chemical Database, U.S. Department of Energy
Solubility
4 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Miscible with water
- Hazardous Substances Data Bank (HSDB)
- Soluble in ethyl alcohol, ethyl ether; slightly soluble in carbon tetrachloride
- Hazardous Substances Data Bank (HSDB)
- Soluble in mineral oil, most organic solvents
- Hazardous Substances Data Bank (HSDB)
- Miscible
- NIOSH Pocket Guide
Partition coefficient (log Kow)
1 record
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 0.83
- Hazardous Substances Data Bank (HSDB)
Viscosity
1 record
Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.
- 3.15 centistokes at 25 °C
- Hazardous Substances Data Bank (HSDB)
Odour
4 records, each a different case
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
- Mild, ether-like odor
- Hazardous Substances Data Bank (HSDB)
- Slight, rancid odor
- Hazardous Substances Data Bank (HSDB)
- Weak, pleasant odor
- Hazardous Substances Data Bank (HSDB)
- Characteristic; quality: sweet, ester; hedonic tone: pleasant
- Hazardous Substances Data Bank (HSDB)
These are the public records read for 2-Butoxyethanol, published here unchanged except that computer-generated digit strings are shortened (28.520000000000003 shows as 28.52). Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for 2-Butoxyethanol
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable Word .docx with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.